FC-202P75KT6131G2910 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P75KT6131G2910 is part of the VLT FC 202 AQUA Drives series and delivers a typical shaft output of 55 kW at heavy overload and 75 kW at normal operation. It has a continuous output current of 83 A (heavy overload) and 100 A (normal operation), with an efficiency rating of 0.98 and an IE2 energy efficiency class. The drive operates on three phase power, supports up to 225 A pre-fuse, and allows a maximum ambient temperature of 50 °C.
Internal Product Review
The FC-202P75KT6131G2910 is a Danfoss VLT AQUA drive designed for process-duty motor control with three-phase power and IE2 energy efficiency. High 0.98 efficiency and 75 kW typical shaft output give the unit strong operating economy under sustained load. Support for up to 300 m unshielded motor cable makes the drive especially practical for distributed installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P75KT6131G2910 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It belongs to the VLT AQUA Drive product group and uses the internal series identifier 202. The unit converts fixed-frequency three-phase power into an adjustable output that allows pumps, blowers, and irrigation fans to match motor speed to process demand, reducing water hammer and energy consumption in industrial automation.
It accepts three-phase power and delivers a continuous current of 83 A for heavy-overload duty or 100 A for normal-overload duty. These values indicate the maximum RMS current that the inverter can supply without derating under the respective load profiles. When operated in heavy-overload mode, the typical shaft output reaches 55 kW, while the normal-overload setting supports 75 kW, allowing motor torque to accommodate variations in hydraulic loads. An electrical efficiency of 0.98 limits conversion losses, and the drive carries the IE2 energy-efficiency class. Estimated internal power loss is 1500 W, so cabinet ventilation must accommodate this heat during continuous operation.
The drive operates at ambient temperatures up to 50 °C without output reduction and withstands relative humidity up to 95%, permitting installation in non-condensing pump rooms. Upstream protection is provided by a maximum pre-fuse rating of 225 A. Line-supply conductors can have a cross-sectional area of up to 150 mm², while brake-link conductors can have a cross-sectional area of up to 95 mm². Motor terminals support shielded cable runs up to 150 m or unshielded cable runs up to 300 m. The digital outputs can supply up to 40 mA for indicators or relays, allowing the drive to operate compatible low-current signaling devices.
