FC-202P75KT4131H1297 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P75KT4131H1297 is a three phase drive in the VLT FC 202 AQUA Drives series with a rated output power of 75 kW and an efficiency of 0.98. It supports mains voltage from 380 to 480 VAC and has continuous output currents of 147 A at 380-440 V and 130 A at 441-480 V. The drive includes an RFI Class A1/B filter and features maximum input currents of 133 A and 118 A for 380-440 V and 441-480 V respectively.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P75KT4131H1297 is an AC variable frequency drive built by Danfoss for the VLT FC 202 AQUA Drives series. It converts fixed-frequency three-phase mains power into a controlled output that matches the load requirements of pumps and fans commonly used in water treatment, irrigation, and general fluid-handling systems. By adjusting motor speed rather than relying on throttling valves, the drive improves energy use and reduces mechanical stress across automated process lines.
The unit accepts a supply range of 380–480 VAC and delivers a rated motor output of 75 kW. The maximum input current is 133 A on 380–440 V networks and 118 A on 441–480 V networks. Continuous output can reach 147 A on the lower voltage band and 130 A on the higher voltage band. The conversion efficiency is 0.98, which limits heat losses during operation. The inverter section modulates the carrier frequency up to 32 kHz for fine torque resolution. An internal filter complies with RFI Class A1/B (C1) requirements to reduce conducted emissions. The control terminals include one analog output that can drive loads with an impedance of 500 Ω and six digital inputs rated for 28 V DC with an impedance of 4 kΩ. A digital output can source up to 40 mA. The power terminals accommodate motor conductors with a cross-sectional area of up to 150 mm² and brake conductors with a cross-sectional area of up to 95 mm².
The drive tolerates a phase imbalance of up to 3.0 % without triggering an alarm, but the incoming conductors must be protected by fuses rated at no more than 250 A to limit short-circuit energy. The power bridge is designed for three-phase power, allowing direct connection to compatible industrial mains. Proper upstream protection and conductor sizing are required to support the stated current levels. The internal series identifier is 202, and its associated parameter maps and mechanical format correspond to other models in the VLT AQUA Drive product group.
