FC-202P75KT4131F6658 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P75KT4131F6658 belongs to the VLT FC 202 AQUA Drives series and features a rated output power of 75 kW and a rated horsepower of 100 hp. It supports three phase power at 380 to 480 VAC and runs with an efficiency of 0.98. The drive provides a continuous output current of 130 A at 441-480 V, with a maximum ambient temperature of 50°C and a maximum altitude of 1000 m without derating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P75KT4131F6658 is an AC variable frequency drive developed by Danfoss within the VLT FC 202 AQUA Drives series. The unit converts fixed-frequency three-phase mains power to a controlled output so pumps, blowers, and other water-handling equipment can run at the precise speed demanded by an automation controller. By adjusting motor frequency and voltage, it reduces energy use and mechanical stress while retaining the communication and protection features common to the VLT AQUA Drive product group.
Its power section is rated for a continuous apparent output of 104 kVA, delivering up to 130 A of current to the motor terminals when the supply is between 380 – 480 VAC three-phase lines. At these levels the inverter achieves an efficiency of 0.98, so only 1384 W of heat are released inside the cabinet during full-load operation. The input path can draw a maximum of 118 A and must be protected by a 250 A pre-fuse to clear faults without nuisance trips. Energy efficiency is classified as IE2 and the drive supplies 100 hp of mechanical power, corresponding to 75 kW at the shaft.
The drive can be installed at altitudes up to 1000 m without derating and remains fully functional in ambient air temperatures of up to 50 °C. Its cooling airflow and field-bus boards are laid out for water-industry panels, and conductor sizing is defined: brake or load-share links may use 95 mm² copper, line and motor leads may be up to 150 mm², and motor cables can extend 150 m if shielded or 300 m when left unshielded. The power stage supplies a rated mechanical output of 75 kW, identified internally by the 202 series code, and all ratings assume three-phase power at 441-480 V with no component derating.
