FC-202P5K5T6131H9485 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P5K5T6131H9485 is part of the VLT FC 202 AQUA Drives series and has a power rating of 5.5 kW with a horsepower of 7.5 HP. It operates on three phase power and offers an efficiency of 0.97. The drive supports a continuous output current of 9.5 A at 525-550 V and 9.0 A at 551-600 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P5K5T6131H9485 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. The unit converts fixed-frequency mains power into a modulated output that allows precise control of centrifugal pump or fan speed in water and wastewater installations. This variable-speed operation improves process regulation and reduces energy use when the connected equipment does not need to operate at full speed. Gradual acceleration and deceleration also reduce mechanical stress on pumps, fans, valves, and connected piping.
The motor power rating is 5.5 kW, which corresponds to a mechanical shaft capability of 7.5 HP. The inverter can deliver a continuous output current of 9.5 A when operated from 525 to 550 V AC. Its efficiency is 0.97, and the estimated thermal loss is 195 W under rated operating conditions. At 551 to 600 V, the continuous output current is 9.0 A, while the apparent power drawn at 550 V is 9.0 kVA. The input current may reach 8.6 A and must be protected by a 32 A pre-fuse. The terminal block accepts power cables with cross-sectional areas up to 4 mm² and disconnect conductors with cross-sectional areas up to 6 mm². These conductor capacities support installation in compact control panels used for municipal pumping and water-processing equipment.
The analog input has a bandwidth of 200 Hz and a 10-bit resolution for processing signals from pressure or flow transmitters. The analog output can drive a load of up to 500 Ω, allowing the drive to retransmit process values to connected control equipment. Digital inputs tolerate up to 28 V DC for connection to common industrial control signals. The transistor output can switch pulses at 32 kHz, supporting rapid valve control, pulse signaling, or counter functions. The drive uses a three-phase power supply, which provides balanced loading across the industrial mains. Its integrated signal interfaces allow it to manage variable-speed pumps while exchanging operating values with plant instrumentation and higher-level control systems.
