FC-202P5K5T4E55H2XGX3SXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P5K5T4E55H2XGX3SXSXXXXAXBXCXXXXDX is a three phase drive from the VLT FC 202 AQUA Drives series with a power rating of 5.5 kW and 7.5 horsepower. It operates with a mains voltage range of 380 to 480 VAC and includes a mains disconnect with fuse. The drive features an IP55 protection level, a graphical local control panel, and an integrated RFI filter.
Internal Product Review
The FC-202P5K5T4E55H2XGX3SXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 202 AQUA Drive suited for fluid-handling systems, with a 5.5 kW rating and three-phase power. A 380 to 480 VAC input range and IP55 / Type 12 protection support dependable installation in demanding plant environments. The graphical local control panel and mains disconnect with fuse add practical serviceability, making this drive a strong choice for process applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P5K5T4E55H2XGX3SXSXXXXAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The drive converts fixed-frequency mains power into a variable-frequency output for controlling pumps and blowers in water and wastewater systems. Its internal series identifier is 202. Adjusting motor speed to match real-time demand can reduce energy consumption when full output is unnecessary. Controlled acceleration and deceleration also reduce valve throttling and soften hydraulic surges that can place stress on piping networks.
The inverter provides an electrical output of 5.5 kW, corresponding to 7.5 HP for systems that use imperial power units. Its rectifier accepts an input range of 380–480 VAC, which accommodates common industrial low-voltage supplies. The drive operates with three-phase power, allowing the incoming load to be distributed across all three supply conductors. An IP55 / Type 12 enclosure protects internal components from dust and low-pressure water jets. Cable glands use the Adaptation A smooth imperial profile for compatible cable entry hardware. The unit does not include a brake chopper, so applications that generate substantial regenerative energy require an appropriate external method of dissipation. These electrical and enclosure features permit installation near pumping equipment when the required supply, spacing, and cable-routing conditions are satisfied.
The integrated RFI filter suppresses conducted electrical noise that could otherwise travel back through the mains supply. A graphical local control panel provides front-panel access to operating values, parameters, alarms, and trend information. The built-in mains disconnect and fuse isolate incoming power for service and provide short-circuit protection. Interface text is supplied through the Standard Language Pack for routine operation and setup. The electronic boards do not have a conformal coating, so the drive should be protected from corrosive vapors and condensation that could reach internal components. The option slots are unpopulated, and the housing retains the base mechanical outline associated with this configuration.
