FC-202P5K5T4E20H1XGCXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P5K5T4E20H1XGCXXXSXXXXAXBXCXXXXDX is part of the VLT FC 202 AQUA Drives series and features a power rating of 5.5 kW with a maximum output of 7.5 HP. This drive is designed for three phase power with a mains voltage range of 380 to 480 VAC and includes a graphical local control panel. It offers IP20 protection, coated PCBs, and an integrated RFI filter Class A1/B.
Internal Product Review
The FC-202P5K5T4E20H1XGCXXXSXXXXAXBXCXXXXDX is a Danfoss VLT AQUA drive with 5.5 kW output and 380 - 480 VAC input. Three-phase power and a graphical local control panel make setup and daily adjustment straightforward in process installations. A coated PCB and IP20 / Chassis protection round out a very capable drive for AQUA service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P5K5T4E20H1XGCXXXSXXXXAXBXCXXXXDX is a variable frequency drive produced by Danfoss as part of the VLT FC 202 AQUA Drives series. Within the VLT AQUA Drive product group, it carries the internal series identifier 202. Designed for pump and fan applications, the drive adjusts motor speed to regulate flow and pressure in water treatment and distribution systems. This variable-speed operation allows pumps to respond accurately to changing process demand while reducing the energy consumed by motors that would otherwise run continuously at full speed.
The inverter delivers up to 5.5 kW of continuous power, corresponding to a motor rating of 7.5 HP. It accepts an input voltage of 380–480 VAC from a three-phase power supply, allowing connection to common industrial electrical systems within that voltage range. The IP20 chassis enclosure protects against accidental finger contact with hazardous internal parts, but the drive must be installed inside a suitable ventilated cabinet. Airflow around the chassis helps remove heat generated by the power electronics during continuous operation. The drive does not include a brake chopper, so applications with substantial regenerative energy require an appropriate external braking arrangement. Its base configuration does not include customer-specific hardware adaptations or optional expansion modules.
Electromagnetic interference is controlled by an input filter classified as RFI Class A1/B (C1), supporting operation where conducted emissions must be limited. Internal circuit boards use a coated PCB construction that provides additional protection against humidity and airborne contamination. Parameters and operating information are presented through a detachable graphical local control panel, which provides a readable interface for monitoring drive status and changing settings. The panel uses the standard language pack, making its menus and operating messages available in the supported languages. Power and control wiring pass through standard cable entries, so the enclosure does not require an additional gland plate for the base installation. The separate wiring paths also help organize incoming power, motor output, and control conductors within the cabinet.
