FC-202P5K5T4131X7277 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P5K5T4131X7277 is part of the VLT FC 202 AQUA Drives series and has a power rating of 5.5 kW or 7.5 HP. It operates with a continuous output current of 13 Amps at 400 V and supports three phase power with a mains voltage range of 380 to 480 VAC. Maximum ambient temperature is 50 degrees Celsius and efficiency is specified at 0.97.
Internal Product Review
The FC-202P5K5T4131X7277 is a Danfoss VLT AQUA drive rated for 5.5 kW and 7.5 HP duty. Operation across 380 to 480 VAC on three-phase power supports flexible integration in process and pumping systems. A 13 A continuous output current gives this drive strong control authority for dependable AQUA service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P5K5T4131X7277 is a variable frequency drive manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series. It regulates the speed of three-phase induction motors used with pumps, blowers, and aerators in water treatment and distribution systems. By adjusting output frequency instead of relying on mechanical flow restriction, the drive provides responsive process control and can reduce energy consumption when full motor speed is unnecessary. Its control functions support applications that require changing flow rates, stable pressure, or regulated aeration during normal plant operation. The 202 subgroup uses consistent parameter structures and mechanical dimensions that support standardized control panel layouts.
The drive accepts an input voltage range of 380–480 VAC, allowing direct connection to common industrial power systems without a transformer. It supplies a continuous motor phase current of 13 A through an electronic conversion stage that provides 5.5 kW of motor output power. Conversion efficiency reaches 0.97, limiting the portion of incoming electrical energy that is released as heat during operation. The unit operates with three-phase power, which supports balanced motor torque and helps minimize vibration. Continuous input current is 11.7 A, providing a basis for selecting appropriately sized supply conductors and switching equipment. Its apparent power demand is 9.0 kVA, which can be used when evaluating upstream power distribution and harmonic mitigation equipment.
The drive can operate at ambient temperatures up to 50 °C, making it suitable for pump rooms and equipment areas without dedicated cooling systems. At rated output, the electronics dissipate 187 W, so the surrounding enclosure must provide enough ventilation to remove the generated heat. Upstream circuit protection should use a fuse or circuit breaker rated no higher than 30 A. The disconnect block accepts field conductors with cross-sectional areas up to 6 mm², while the motor terminals accommodate cables up to 4 mm². These terminal capacities support the stated current levels while maintaining practical cable routing inside the control enclosure. For regenerative deceleration, the braking circuit can connect to resistors with values as low as 99 Ω. A resistance of 113.3 Ω is the nominal selection for routine stopping cycles where controlled dissipation of returned motor energy is required.
