FC-202P5K5T4131F1078 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202P5K5T4131F1078 is a VLT FC 202 AQUA Drive manufactured by Danfoss, designed for three phase power with a power rating of 5.5 kW and a horse power of 7.5 HP. It operates at 380 to 480 VAC mains voltage, offers an efficiency of 0.97, and supports continuous kVA of 9.0 at 400 V and 8.8 at 460 V.
Internal Product Review
The FC-202P5K5T4131F1078 is a Danfoss VLT FC 202 AQUA drive rated at 5.5 kW and 7.5 HP. Three-phase 380 - 480 VAC input supports straightforward integration, and 0.97 efficiency reflects strong energy performance. Support for up to 150 m shielded motor cable makes this drive a very capable choice for demanding AQUA installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P5K5T4131F1078 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Built for water-handling applications, the unit modulates motor speed so that pumps or blowers match process demand instead of running at a fixed frequency. Acting as the interface between the mains supply and an induction motor, it provides closed-loop control that improves energy use and reduces hydraulic stress within treatment systems. The drive uses the internal series identifier 202, which indicates its mechanical and electrical configuration within the Danfoss pump controller range.
The power section accepts a three-phase supply of 380–480 VAC and provides controlled output for pump motors rated up to 7.5 HP. Continuous apparent power reaches 9.0 kVA when supplied from 400 V lines and 8.8 kVA on 460 V networks, providing compatibility with common plant voltages. With an overall efficiency of 0.97, approximately 3% of the input power is dissipated as heat, allowing the drive to be used in compact cabinet layouts. The drive maintains these electrical limits at ambient temperatures from 0 °C through the stated 50 °C ceiling. It operates without derating at elevations up to 1,000 m, while derating is permitted for operation at elevations up to 3,000 m.
The drive provides an output capability of 5.5 kW, and its thermal loss under rated load is limited to 187 W, reducing panel ventilation requirements. Fuse coordination permits a maximum line protection rating of 30 A. The drive tolerates relative humidity of up to 95% without condensation. Motor connections can use shielded cable up to 150 m long or unshielded cable runs up to 300 m long. The power terminals accept conductors with a cross-sectional area of 4 mm², while the disconnect wiring accepts conductors with a cross-sectional area of 6 mm².
