FC-202P5K5S2131X7986 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P5K5S2131X7986 is part of the VLT FC 202 AQUA Drives series and offers a power rating of 5.5 kW with an efficiency of 0.98. This drive supports 200 to 240 VAC single phase power, has a continuous output current of 24.2 A, and a maximum ambient temperature of 50 °C. It can be used with shielded motor cables up to 150 m or unshielded cables up to 300 m.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P5K5S2131X7986 is an AC variable frequency drive produced by Danfoss as part of the VLT FC 202 AQUA Drives series. Intended for pump and fan regulation in water and wastewater installations, the drive converts single-phase utility power into a modulated output that lets centrifugal or positive-displacement motors track flow, level, or pressure commands. Built-in AQUA control software offers proportional-integral functions and sleep modes tailored to the quadratic torque loads commonly found in municipal and industrial fluid systems.
The input section accepts a mains voltage range of 200–240 VAC and draws a continuous current suited for residential or light-industrial feeders. The inverter delivers a steady 24.2 A to the motor terminals while providing a continuous apparent power of 8.7 kVA. Mechanical output is rated at 5.5 kW, which is equivalent to 7.5 HP. This output provides adequate capacity for midsize booster sets or filtration skids. Single-phase operation simplifies installation where three-phase utility service is unavailable, and digital signal processing maintains accurate voltage-vector control during operation.
Overall conversion efficiency reaches 0.98, limiting waste heat to 110 W and reducing enclosure ventilation requirements. Full current can be delivered at ambient temperatures up to 50 °C, and altitude derating is not required below 1,000 m. For short overloads, the unit tolerates 110% load for 1 minute, allowing pumps to clear air pockets or overcome temporary pressure-head changes without oversizing the drive. A frequency resolution of ±0.003 Hz enables precise speed adjustments for applications that require stable flow or pressure. Motor leads may extend up to 150 m when shielded or 300 m when unshielded, supporting installations in which a motor is located remotely at a well, sump, or pumping station.
