FC-202P5K5S2131H8048 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P5K5S2131H8048 is a 7.5 HP drive with a power rating of 5.5 kW. Part of the VLT FC 202 AQUA Drives series, it supports single phase power at mains voltages from 200 to 240 VAC and features an RFI C2 filter for electromagnetic compatibility.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P5K5S2131H8048 is an AC variable-frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It regulates the speed of centrifugal pumps, blowers, and similar induction-motor loads so that flow can follow real-time demand in water treatment and irrigation systems. Its centrifugal pump control capability allows the motor to respond to changing process requirements without relying solely on mechanical flow restrictions. Adjusting motor speed instead of throttling valves can lower energy consumption and reduce mechanical stress on piping, valves, and pump impellers.
The inverter provides a continuous output of 5.5 kW, making it suitable for mid-size pump motors while preserving space inside the control cabinet. It operates from a supply range of 200–240 VAC, allowing connection to compatible low-voltage service without an additional transformer. The mains input uses single-phase power, and the drive converts that incoming supply into a controlled output for the connected motor. Its control electronics, precharge circuits, and internal fans receive power from the same incoming branch circuit. The compact cabinet footprint supports installation where enclosure space is limited, while the adjustable output frequency provides direct control over motor speed. This arrangement is useful in pumping systems where demand changes throughout the operating cycle and fixed-speed operation would waste energy.
Conducted electromagnetic noise is reduced by an integrated RFI C2 filter, which limits interference passed back toward the supply network. The filter is built into the drive, reducing the need for a separate filtering device in installations that meet the applicable C2 requirements. A shared internal power architecture supplies the control section, precharge components, and cooling fans from the incoming mains connection. The drive’s enclosure and keypad provide access to operating commands, status information, and adjustable motor-control parameters. Compatible fieldbus options can connect the unit to a higher-level control system for coordinated pump operation and process monitoring. Remote keypad and enclosure accessories must match the model’s mechanical arrangement and connector interfaces.
