FC-202P55KT4E20H1XGCXXXSXXXXALBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P55KT4E20H1XGCXXXSXXXXALBXCXXXXDX is part of the VLT FC 202 AQUA Drives series. It features a three phase power input with a mains voltage range of 380 to 480 VAC, and includes a coated PCB for improved durability. This drive has an IP20 chassis protection level and comes with a graphical local control panel as well as an RFI Class A1/B filter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P55KT4E20H1XGCXXXSXXXXALBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. By converting fixed mains frequency into a controlled output, the unit regulates the speed of induction motors that move water through pumps or circulate air through ventilation fans. This capability allows automation systems in treatment plants, cooling towers, and other fluid-handling facilities to match flow rates to real-time demand. Adjusting motor speed to suit the required flow can also reduce unnecessary energy consumption when the system operates below its maximum capacity.
The drive includes a PROFINET MCA 120 communication card, enabling the cyclic exchange of setpoints and status data over Ethernet-based field networks used by modern PLCs. Cabling enters the chassis through standard cable entries, simplifying the gland-plate layout while maintaining suitable strain relief for the wiring. The power section accepts line voltages from 380–480 VAC and operates with three-phase power commonly available in industrial facilities. An IP20 chassis housing provides protection against accidental finger contact with internal components. Its open chassis design is intended for installation inside a ventilated control cabinet that supplies the required physical and environmental protection. The cabinet layout must also provide adequate clearance for cooling airflow and convenient access to power, control, and communication connections.
A protective coated PCB helps shield the control electronics from moisture and airborne contaminants that may be present in pump rooms and similar operating areas. Local configuration is performed through the backlit graphical local control panel, which provides direct access to parameters, operating values, and trend readings without requiring external programming tools. Conducted emissions are reduced by the integrated RFI Class A1/B (C1) filter, helping the drive operate near sensitive instrumentation without an additional line filter. PROFINET communication allows the control system to send operating commands and receive drive status information through the plant network. The local panel remains available for direct monitoring and parameter changes when access through the higher-level controller is not required.
