FC-202P55KT4131B9533 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P55KT4131B9533 is part of the VLT FC 202 AQUA Drives series and operates on a mains voltage of 380 to 480 VAC with three phase power. It features an IE2 energy efficiency class and supports a maximum ambient temperature of 50 degrees Celsius. The drive allows for a maximum pre-fuse of 160 Amps and can use shielded motor cables up to 150 meters and unshielded cables up to 300 meters.
Internal Product Review
The FC-202P55KT4131B9533 is a Danfoss VLT AQUA drive engineered for water and wastewater applications on 380 - 480 VAC three-phase power. IE2 efficiency and operation up to 50 °C support dependable performance in demanding industrial environments. Extended installation flexibility is a strong advantage, with support for 150 m shielded motor cable or 300 m unshielded motor cable.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P55KT4131B9533 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. Within water-handling plants, it modulates induction motor speed so pumps, blowers, and aerators match real-time demand rather than running at a constant frequency. By converting three-phase mains power into a synthesized output, the unit provides adjustable motor control that improves hydraulic regulation and lowers energy use.
The input section accepts 380–480 VAC three-phase power, allowing the inverter to connect directly to standard industrial switchgear. One programmable analog output can drive external indicators or actuators with a load impedance of up to 500 Ω without signal degradation. Overall efficiency is classified as IE2, indicating the drive’s expected conversion losses under nominal operating conditions. For high-speed flow metering, the drive offers a pulse train rated at 32 kHz and supplies up to 40 mA, providing clear signals to flow sensors or batch counters across long cable runs. Continuous operation is permitted at altitudes up to 1000 m without derating, while the thermal limits permit full-load operation from 0 °C and reduced-load operation down to -10 °C.
Above the standard elevation limit, the unit can continue operating with derating at altitudes up to 3000 m. Overcurrent protection is provided by a recommended 160 A upstream fuse ahead of the rectifier stage. The power terminals accept motor and brake conductors with cross-sectional areas up to 50 mm², accommodating the braking resistor and the line or motor leads. Cable routing can extend up to 150 m with shielded cable or 300 m with unshielded cable, supporting installations with remote pump rooms. The ambient temperature may rise to 50 °C before output derating begins, allowing operation in warm mechanical spaces when the required ventilation and installation clearances are maintained.
