FC-202P4K0T6131G2830 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P4K0T6131G2830 is a three-phase drive from the VLT FC 202 AQUA Drives series with a power rating of 4.0 kW and 5.0 horsepower. It supports a continuous output of 6.4 A at 525-550 V and 6.1 A at 551-600 V, with a maximum pre-fuse of 20 A. The drive achieves 0.97 efficiency and is designed for a maximum unshielded motor cable length of 300 meters.
Internal Product Review
The FC-202P4K0T6131G2830 is a Danfoss VLT FC 202 AQUA drive designed for three-phase power and rated at 4.0 kW. An efficiency of 0.97 and a 5.0 HP capacity make this unit a strong fit for energy-conscious water and HVAC duty. The 100000 Arms SCCR is a standout specification for demanding installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P4K0T6131G2830 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It converts fixed-frequency, three-phase utility power into a variable-frequency output that regulates centrifugal pumps, blowers, and motors used in automated water-handling systems. By adjusting motor speed rather than restricting flow mechanically, the controller helps maintain stable pressure while reducing energy consumption and equipment wear.
The drive has a nominal electrical rating of 4.0 kW, equivalent to 5.0 HP, for midsize pumping applications. When supplied with 525–550 V, it delivers a continuous output current of 6.4 A. At 551–600 V, the continuous output current is limited to 6.1 A. Its apparent power capacity is 6.1 kVA at 550 V, which assists with upstream transformer sizing, while an efficiency of 0.97 limits power dissipation to 145 W under rated load. Input current is limited to 5.8 A, and the rectifier tolerates a phase imbalance of up to 3.0%. Power is supplied from a three-phase network, allowing balanced current conduction across the input stages.
Circuit protection requires a maximum upstream fuse rating of 20 A. The capacitors may be recharged no more than twice per minute to prevent premature aging. Disconnect terminals accept conductors with cross-sectional areas up to 6 mm². Line, motor, and brake terminals accept conductors with cross-sectional areas up to 4 mm². The inverter supports up to 150 m of shielded motor cable, while an unshielded motor cable may be up to 300 m long. These cable limits help control voltage drop and electromagnetic interference between the drive and motor. The short-circuit current rating is 100,000 A rms, permitting installation on power distribution systems with high available fault current.
