FC-202P4K0T6131G1533 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P4K0T6131G1533 is part of the VLT FC 202 AQUA Drives series and operates with a power rating of 4.0 kW and a supply voltage range of 525 to 600 V AC. This three-phase drive delivers 5.0 horsepower, a maximum output frequency of 590 Hz, and achieves an efficiency of 0.97. The continuous output current is 6.1 A, with a maximum ambient temperature rating of 50°C.
Internal Product Review
The FC-202P4K0T6131G1533 is a Danfoss VLT FC 202 AQUA drive built for dependable process control, with a 4.0 kW power rating and three-phase power input. Efficiency at 0.97 and operation on 525–600 V AC make the drive a strong fit for demanding water and wastewater installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P4K0T6131G1533 is a variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit converts fixed three-phase mains power into a modulated output that allows plant controllers to regulate induction motor speed in municipal pumping, irrigation, and filtration systems. By matching motor torque to hydraulic demand, the drive lowers energy consumption and mechanical stress in continuous-duty fluid-handling equipment commonly used in industrial automation.
It accepts a three-phase input of 525–600 V AC and provides 4.0 kW of continuous shaft power at the motor terminals. Under nominal line conditions, the inverter can deliver a continuous output current of 6.1 A and tolerate bursts of up to 9.2 A during acceleration or pressure spikes. The output frequency is adjustable from zero to 590 Hz, allowing centrifugal pumps to operate above line-frequency speed when required. The available voltage, power, and current must be considered when selecting a compatible motor and conductor size. Upstream circuit protection can be provided by the recommended 20 A pre-fuse. Motor leads can extend up to 150 m when shielded or 300 m when unshielded without exceeding the permitted output voltage drop.
The conversion stage reaches an efficiency of 0.97, while residual heat is limited to 145 W at full load, reducing enclosure ventilation requirements. The drive can operate at ambient temperatures of up to 50 °C without derating. Extended acceleration cycles are supported by a programmable ramp time of up to 3600 s. The adjustable ramp allows gradual changes in motor speed during soft-fill sequences, helping reduce hydraulic shock in connected piping. Integrated control functions also support PID-based regulation for maintaining flow, pressure, or water level in response to process feedback.
