FC-202P4K0T4131Z0876 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P4K0T4131Z0876 is a VLT FC 202 AQUA Drive with a power rating of 4.0 kW and a horsepower of 5.0 HP. This three-phase drive operates at an efficiency of 0.97 and supports a mains voltage range of 380 to 480 VAC. It features a maximum motor output frequency of 590 Hz and provides a continuous output current of 8.2 A at 441-480 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P4K0T4131Z0876 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. As a three-phase inverter, it modulates the incoming 380–480 VAC mains supply to provide regulated motor output, allowing centrifugal pump and blower speeds to match real-time flow demands. In automated water and wastewater facilities, the drive reduces energy consumption, soft-starts equipment to limit mechanical stress, and provides process feedback to supervisory PLCs. Its power level is suitable for small distribution pumps and secondary treatment aerators.
The drive provides a continuous output of 8.2 A at 441–480 V, which is the steady current available to the motor. During acceleration, it can momentarily supply 12.3 A without exceeding thermal limits. Line current remains below 7.4 A, which assists with breaker sizing. Efficiency is 0.97, and only 124 W is lost as heat at rated load. Output frequency is adjustable up to 590 Hz, allowing the inverter to support high-speed pump or fan applications. Output voltage follows the supply voltage across the allowable input range. Cable lugs accept conductors up to 4 mm² on the motor side and 6 mm² on the disconnect side, while the power stage supports 6.5 kVA of apparent power.
The rated mechanical output is 4.0 kW, placing this model in the mid-power range of the VLT AQUA Drive product group. Acceleration and deceleration profiles can be adjusted from 1 second to 3600 seconds, allowing gentle pipe filling or rapid flow changes as required by the application. Upstream circuit protection requires 20 A fuses that correspond to the semiconductor fault limits during short-circuit events. The adjustable speed and timing controls support booster pumps, filtration skids, and treatment blowers that require precise flow regulation.
