FC-202P4K0T4131F8616 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P4K0T4131F8616 is part of the VLT FC 202 AQUA Drives series and has a power rating of 4.0 kW, supporting three phase power with an efficiency of 0.97. It operates on input voltages from 380 to 480 VAC and offers a continuous output current of 8.2 amps at 441-480 V. This drive features two digital pulse outputs and an analog output resolution of 8 bits.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P4K0T4131F8616 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It accepts three-phase power and modulates the output frequency so pump and fan motors in water-treatment or irrigation systems can run only as fast as process demand requires. Integrating this drive into an automation loop reduces throttling losses, supports soft-start sequences, and provides feedback through its built-in analog and digital I/O interfaces.
When connected to a 380–480 VAC mains supply, the drive supplies up to 6.5 kVA of apparent power at 460 V. It draws a continuous input of 7.4 A and can deliver 8.2 A to the motor terminals, enough to sustain the rated mechanical output of 5.0 HP. Electrical conversion efficiency reaches 0.97, meaning only three percent of incoming energy is dissipated as heat. Pulse-width-modulated switching is handled by an inverter section that can operate at carrier frequencies up to 32 kHz, allowing low-noise motor operation. Control wiring includes two digital pulse outputs, each capable of 40 mA, plus an 8-bit analog output that can source or sink through a 500 Ω load to report speed, torque, or process variables to the PLC.
Circuit protection and installation details are sized for medium-duty pump rooms. A maximum pre-fuse of 20 A safeguards the power stage, while line cables up to 4 mm² and a disconnect conductor of 6 mm² can be terminated in the spring-clamp blocks. The drive’s internal losses average 124 W, so enclosure airflow must remove that heat during continuous service. Its nominal motor reference power is 4.0 kW, matching the Series Identifier 202 platform for mid-range centrifugal loads in the VLT AQUA Drive product group.
