FC-202P45KT6131Z2812 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202P45KT6131Z2812 by Danfoss is part of the VLT FC 202 AQUA Drives series, designed for three phase power systems. It delivers a normal output current of 62 Amps and supports a normal overload power of 45 kW. The drive offers a maximum output frequency of 590 Hz and operates with an efficiency of 0.98.
Internal Product Review
The FC-202P45KT6131Z2812 is a Danfoss VLT AQUA drive well suited for demanding pump applications, offering 45 kW normal overload power and 0.98 efficiency. Three-phase power and 62 A normal output current support stable motor control, making the drive a strong choice for high-performance fluid handling systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P45KT6131Z2812 variable frequency drive is manufactured by Danfoss for the VLT FC 202 AQUA Drives series within the VLT AQUA Drive product group. Intended for three-phase pump and blower applications, it converts fixed-frequency mains power into a pulse-width-modulated output that allows controllers to match motor speed to real-time demand. This speed control minimizes energy consumption, limits water hammer, and stabilizes process pressure in municipal treatment plants and industrial fluid-handling systems. The drive can regulate motor operation as flow or pressure requirements change, reducing the need for mechanical throttling devices.
This drive has a normal line current of 56 A at 575 V and supplies up to 62 A to the motor terminals while maintaining an efficiency of 0.98 under rated conditions. Its control stage can produce adjustable output frequencies up to 590 Hz, permitting operation with compatible high-speed pumps or blowers. For variable-torque loads, it provides a normal-overload power rating of 45 kW for one minute during each ten-minute period. Operation is permitted at ambient temperatures up to 50 °C and with a mains phase imbalance no greater than 3.0%. Shielded motor cables may extend up to 150 m, while unshielded motor cables may extend up to 300 m without exceeding the permitted voltage drop. These cable limits provide flexibility when the drive and motor are installed in separate areas of a facility.
For high-overload operation, the power stage can draw 47 A from the supply and deliver 52 A to the load, supporting a high-overload power rating of 37 kW. Upstream circuit protection permits a maximum prefuse rating of 150 A. Installation at elevations up to 1000 m does not require output derating. The control logic permits only one power-up per minute to protect the DC-link capacitors from repeated charging current. This restriction applies when cycling incoming power and does not prevent normal start and stop commands from controlling the connected motor. Appropriate spacing and ventilation should be maintained so that the drive can operate within its permitted ambient temperature range.
