Product Description:

The FC-202P45KT4E20H1XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It converts fixed-frequency mains power into regulated output power that matches the operating requirements of centrifugal pumps, aerators, and other water-handling equipment used in industrial and municipal treatment facilities. The drive controls motor speed and torque to accommodate changing flow or pressure demands without relying on mechanical throttling. A graphical local control panel provides access to operating data, parameter settings, alarms, and manual controls while also supporting communication with the plant control system.

The electrical section accepts supply voltages of 380–480 VAC, allowing direct connection to common low-voltage distribution systems within that range. Operation on a three-phase power network balances current across the incoming phases and supports the connected motor load without single-phase derating. The drive does not include a brake chopper, so regenerated energy produced during rapid deceleration must be managed by the motor and load or by suitable external braking equipment. The enclosure has an IP20 chassis protection level, which protects against accidental finger contact but does not provide protection from dust or water. The drive must therefore be installed in a suitable cabinet when the application requires additional protection. Conducted and radiated emissions are reduced by an integrated RFI Class A1/B (C1) filter, supporting operation in installations with applicable electromagnetic compatibility requirements.

The mechanical interface uses standard cable entries that accommodate common cable-routing arrangements and compatible gland plates. The drive has an uncoated printed circuit board, so its enclosure should remain free from condensation, corrosive vapor, and conductive contamination that could damage exposed electronic components. The user interface includes the Standard Language Pack, providing the standard menu languages available for operating and configuring the unit. Internally, the drive carries the series identifier 202, which corresponds to the parameter structure used by FC 202 drives. The configuration does not include optional plug-in modules in the available expansion slots, leaving those positions open for compatible accessories if the application requires additional communication, feedback, or control functions.