FC-202P45KT4131F1097 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P45KT4131F1097 is part of the VLT FC 202 AQUA Drives series and delivers a typical shaft output of 45 kW with a maximum efficiency of 0.98. This three phase drive operates at a mains voltage of 380 to 480 VAC, supports continuous output current up to 80 A, and handles max ambient temperatures up to 50 °C. It features an analog output resolution of 8 bits and supports a max output frequency of 590 Hz.
Internal Product Review
The FC-202P45KT4131F1097 is a Danfoss VLT FC 202 AQUA drive for three-phase power on 380-480 VAC mains. Efficiency of 0.98 and 80 A continuous output current support stable, energy-conscious motor control in demanding pumping systems. A 60 hp output rating makes the drive an excellent fit for high-capacity water handling applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P45KT4131F1097 variable frequency drive is manufactured by Danfoss as part of the VLT FC 202 AQUA Drives series. It regulates motor speed by varying the output frequency and voltage, making it suitable for automated pump and fan installations where water flow or air volume must match process demand. When integrated into a control cabinet, the drive connects to standard sensors and PLC commands to help centrifugal equipment operate efficiently and remain within safe electrical limits. Its variable-speed control can reduce unnecessary motor operation when the connected system requires less flow or pressure.
Designed for three-phase power networks, the inverter accepts line supplies from 380–480 VAC and has an input impedance of 4 kΩ at its control terminals. During nominal operation from 441 to 480 V, it draws 73 A continuously and delivers a motor current of 80 A. This electrical capacity supports a typical shaft output of 45 kW, equivalent to 60 hp, while maintaining an efficiency of 0.98. The output frequency can reach 590 Hz, and acceleration profiles can be extended to 3600 s through the programmable ramp generator. Analog feedback is processed with 8-bit resolution, while phase imbalance must remain below 3.0 percent. Upstream circuit protection is provided by 125 A fuses.
The control board uses Series Identifier 202 within the VLT AQUA Drive product group. During a transient overload, the output stage supplies 88 A for short intervals to support brief increases in motor demand. The drive can operate at ambient temperatures up to 50 °C without derating when installed below an altitude of 1000 m. Shielded motor leads may extend up to 150 m, while unshielded motor leads may extend up to 300 m, providing flexibility for equipment installed across large pump rooms. These cable lengths apply when the three-phase supply remains within the permitted imbalance limit. Proper cable routing also helps preserve motor performance and reduces the likelihood of electrical interference in nearby control wiring.
