FC-202P45KT2131H2590 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P45KT2131H2590 is part of the VLT FC 202 AQUA Drives series and operates on a three phase 200 to 240 VAC power supply. It features an efficiency rating of 0.97, supports one analog output and two digital outputs, and can be used at a maximum ambient temperature of 50 °C. The drive comes with an integrated RFI filter and has a short circuit current rating of 100,000 Arms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P45KT2131H2590 is a Danfoss variable-frequency drive in the VLT FC 202 AQUA Drives series. It modulates the speed of three-phase induction motors used in pumping, aeration, and filtration systems so that flow or pressure matches real-time process demand. By adjusting motor frequency and voltage, the unit can reduce energy consumption in water and wastewater facilities. The VLT AQUA Drive product group is designed for fluid-handling applications that require controlled motor operation under changing loads.
The power section accepts an input of 200–240 VAC from a three-phase power supply and can switch its output carrier at up to 32 kHz for low-noise motor operation. Internal conversion efficiency reaches 0.97, and the design meets the performance threshold of the IE2 energy-efficiency class. One isolated analog output is provided with a load capacity of 500 Ω, while two digital transistor outputs support status signaling to PLCs. An integrated RFI filter limits conducted emissions, and the maximum pre-fuse rating is 250 A. Motor leads may use conductors with cross-sectional areas of up to 150 mm². Shielded motor cables can extend up to 150 m while remaining within the applicable drive-to-motor voltage-drop limits.
Continuous operation is permitted at ambient temperatures up to 50 °C, relative humidity up to 95% without condensation, and altitudes up to 1,000 m without derating. Above 1,000 m, the output current is reduced linearly until the maximum derated operating altitude of 3,000 m is reached. The short-circuit current rating is 100,000 A RMS, allowing installation on supply circuits with high prospective fault current. Adequate enclosure ventilation must be maintained so the drive can dissipate heat during sustained operation. The permitted humidity range supports installation in water-processing facilities when condensation is prevented. Cable routing and shielding should follow the drive installation requirements to control electrical noise and reflected-wave voltage at the motor terminals.
