FC-202P30KT6136H9384 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P30KT6136H9384 is a three phase drive in the VLT FC 202 AQUA Drives series with a power rating of 30 kW and supports up to 40 horsepower. It operates efficiently at 0.98 and tolerates maximum ambient temperatures of 50 °C with relative humidity up to 95 percent. The drive allows a maximum shielded motor cable length of 150 meters and can use control wire sizes ranging from 0.25 mm² to 1.5 mm².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P30KT6136H9384 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit belongs to the VLT AQUA Drive product group and modulates motor speed in water and wastewater applications, allowing pumps and blowers to follow process demand rather than run at a constant line frequency. By adjusting output voltage and frequency, the drive helps reduce energy use while maintaining stable flow or pressure throughout changing process conditions.
This model delivers up to 30 kW of continuous mechanical power, equivalent to 40 HP, when using three-phase power. Conversion efficiency reaches 0.98, so only 2% of incoming energy is dissipated as heat. Operation is permitted in ambient air up to 50 °C before derating is required. The analog monitor channel provides 8-bit resolution and can operate with loads down to 500 Ω, while digital outputs can deliver 40 mA at switching frequencies as high as 32 kHz to actuate external relays or counters. Motor leads may be routed up to 150 m with shielded cable or 300 m with unshielded cable, providing flexibility for installations with remote pump pits. Control terminals accept solid conductors up to 1.5 mm², flexible conductors up to 1 mm², and conductors as small as 0.25 mm² for low-current signals.
The drive maintains its full rating up to 1000 m above sea level and allows installation at elevations up to 3000 m with linear current derating. An upstream protective device rated at a maximum of 80 A is recommended to coordinate with the converter’s inrush characteristics. The enclosure can withstand relative humidity as high as 95% without condensation, making it suitable for humid pump galleries. Analog and digital I/O share a common reference, which simplifies field wiring between the drive and connected control devices. The internal DC link uses a precharge circuit coordinated with the recommended upstream protective device. These operating limits support installation planning for elevated sites, warm equipment rooms, and locations where long motor cables are required.
