FC-202P30KT6135N4886 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P30KT6135N4886 is a VLT FC 202 AQUA Drives series product with a power rating of 30 kW and outputs 40 HP. This drive operates on three phase power and supports a max input current of 37 A and output current up to 41 A at 575 V. It has an efficiency of 0.98 and functions at ambient temperatures up to 50 °C and humidity levels of 95%.
Internal Product Review
The FC-202P30KT6135N4886 is a Danfoss VLT FC 202 AQUA drive built for precise and dependable water-system motor control. A 30 kW power rating paired with 0.98 efficiency gives the unit excellent operating performance in demanding process applications. Support for 50 °C ambient temperature and 95% humidity makes the drive a strong choice for challenging plant environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P30KT6135N4886 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit converts three-phase mains power into a regulated output for centrifugal pumps, blowers, and similar equipment used in water treatment plants and distribution networks. Its control platform adjusts motor speed in response to changing flow and pressure demands, reducing unnecessary energy consumption during periods of partial load. Pump-specific control functions also help limit water hammer and maintain constant process pressure as operating conditions change.
The drive has a power rating of 30 kW, which is equivalent to a shaft output of 40 HP. Under heavy-overload conditions, the rectifier draws 31 A from the supply while the inverter delivers 34 A to the motor. In normal-overload operation, the input current rises to 37 A, and the motor output reaches 41 A. A full-load efficiency of 0.98 limits conversion losses to 600 W, reducing the amount of heat that must be removed from the enclosure. The drive accepts three-phase power at 575 V and uses an 80 A semiconductor pre-fuse to protect the input bus during electrical faults. These electrical characteristics allow the inverter to support pump systems that alternate between steady partial demand and brief periods of higher loading.
The control platform maintains its rated output at elevations up to 1000 m above sea level. At higher elevations, operation is permitted up to 3000 m when the output is reduced linearly to account for lower air density and diminished cooling performance. The drive can operate at ambient temperatures up to 50 °C, while conformal-coated circuit boards tolerate relative humidity levels as high as 95% when condensation is prevented. Shielded motor cables may extend up to 150 m, providing sufficient reach for equipment distributed across large pump rooms or treatment facilities. Unshielded motor cables may extend up to 300 m when the installation does not require the additional electromagnetic protection provided by shielding. The available cable lengths support flexible placement of the drive while preserving the required connection between the inverter and motor.
