FC-202P30KT6131X6169 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P30KT6131X6169 is part of the VLT FC 202 AQUA Drives series and has a power rating of 30 kW and a maximum output of 40 horsepower. This drive operates on three phase power and offers an efficiency of 0.98 with an energy efficiency class of IE2. It supports a maximum ambient temperature of 50 degrees Celsius and allows for shielded and unshielded motor cable lengths up to 150 meters and 300 meters, respectively.
Internal Product Review
The FC-202P30KT6131X6169 is a Danfoss VLT AQUA drive with a 30 kW rating for three-phase power systems. High operating efficiency of 0.98 and an IE2 energy efficiency class support economical continuous-duty performance. Support for motor cable runs up to 300 m unshielded or 150 m shielded stands out as a valuable installation advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danfoss manufactures the FC-202P30KT6131X6169 drive for the VLT FC 202 AQUA Drives series. As part of the VLT AQUA Drive product group, it converts fixed-frequency three-phase power into a variable output that regulates centrifugal pump or blower speed in water-related automation. The design supports energy savings by matching motor speed to real-time hydraulic demand in municipal treatment plants and industrial cooling loops. Variable-speed operation also reduces reliance on mechanical throttling when process demand falls, allowing the connected equipment to operate more efficiently. Controlled acceleration can reduce abrupt pressure changes in piping systems and limit mechanical stress during repeated starts.
The drive delivers a continuous power rating of 30 kW, equivalent to 40 HP, while operating on three-phase power. Its electrical conversion efficiency ratio reaches 0.98, and the unit belongs to the IE2 energy efficiency class. The analog feedback channel provides 8-bit resolution, 0.8% full-scale accuracy, and supports loads with resistance as low as 500 Ω. Digital resources include a sourcing capability of up to 40 mA per output and a pulse generator with a maximum frequency of 32 kHz. Shielded motor cable can extend up to 150 m, while unshielded cable can extend up to 300 m, supporting pumps installed far from the drive. The analog signal can be used for proportional valve control or flow indication in process-monitoring loops. Digital outputs can transmit operating states or control external devices within their available current capacity.
Full-load operation is maintained at altitudes up to 1000 m, while derated operation is permitted at altitudes up to 3000 m. The drive operates at ambient temperatures from 0 °C to 50 °C, with relative humidity permitted up to 95% when condensation is not present. Reduced air density at higher elevations limits natural heat transfer, which accounts for the need to lower the available load above the full-load altitude. An upstream fuse rated at 80 A is required to protect the input rectifier against short-circuit current. Adequate airflow around the enclosure helps the converter remain within its permitted temperature range during continuous operation. Proper separation of motor and control wiring helps preserve analog feedback accuracy and reduces electrical interference in digital signals.
