FC-202P30KT4E20H1XGXXXXSXXXXAXBKCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P30KT4E20H1XGXXXXSXXXXAXBKCXXXXDX is part of the VLT FC 202 AQUA Drives series and features a 40 HP power output with a 30 kW power rating. This drive supports three phase power at 380 to 480 VAC and has an IP20 chassis protection level. It also includes a graphical local control panel and an RFI filter rated Class A1/B (C1).
Internal Product Review
The FC-202P30KT4E20H1XGXXXXSXXXXAXBKCXXXXDX is a Danfoss VLT FC 202 AQUA drive with a 30 kW power rating. Three-phase input and a 380 to 480 VAC mains range support stable integration in industrial pump and fan systems. An IP20/chassis enclosure and graphical local control panel make this unit a practical, well-executed choice for controlled indoor installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P30KT4E20H1XGXXXXSXXXXAXBKCXXXXDX is an AC variable frequency drive produced by Danfoss within the VLT FC 202 AQUA Drives series. It is intended for pump and fan operation in water and wastewater plants, where variable-speed control improves flow regulation and reduces energy use. The model handles centrifugal loads whose torque demand rises with the square of motor speed. Its control functions allow output to follow changing process demand instead of requiring the connected motor to run continuously at full speed.
The drive accepts 380–480 VAC from three-phase power lines and delivers up to 30 kW, which corresponds to 40 HP at the shaft. Cables enter through the factory-installed standard cable entries, so a separate gland plate is not required. The drive does not include a mains option or brake chopper. Regenerative energy must therefore be managed by the connected load or a suitable external braking arrangement. The MCB-101 general-purpose I/O board provides additional digital and analog terminals for process signals. These connections support external sensors, commands, and status signals used in pump or fan control systems. The circuit boards are uncoated, so installation should avoid locations where high humidity, condensation, or airborne contaminants could reach the electronics.
The integrated graphical local control panel provides local parameter access, operating information, and trend views. Its display allows drive status and process values to be reviewed directly at the enclosure. An IP20 chassis enclosure is suitable for installation inside protected switchgear while permitting airflow across the heat sink. Because the chassis is not sealed against water or fine airborne material, the surrounding cabinet must provide suitable protection. The electromagnetic interference network meets RFI Class A1/B (C1), reducing conducted electrical noise on short public low-voltage feeders. A standard language pack provides multilingual menu access through the control panel. The enclosure layout must maintain the required ventilation space so cooling air can move freely around the drive during operation.
