FC-202P30KT2131H6160 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P30KT2131H6160 is part of the VLT FC 202 AQUA Drives series and supports three phase power with a mains voltage range of 200 to 240 VAC. This drive has a power rating of 30 kW, a maximum output frequency of 590 Hz, and an efficiency of 0.97. It allows for a maximum ambient temperature of 50 degrees Celsius and accepts up to 160 Amps for pre-fuse protection.
Internal Product Review
The FC-202P30KT2131H6160 is a Danfoss VLT AQUA drive engineered for 200–240 VAC three-phase power. A 30 kW power rating and 40 HP capacity make the unit a strong choice for demanding pump and fan applications. High operating quality is reinforced by 0.97 efficiency and a displacement power factor above 0.98.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P30KT2131H6160 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It belongs to the VLT AQUA Drive product group and is intended for pump and fan duties in water supply, wastewater, and irrigation stations. In industrial automation, it serves as the power stage that converts a fixed mains supply into a regulated frequency output, allowing a supervisory PLC to modulate motor torque without mechanical valves or dampers. This speed control can match motor operation to changing flow or pressure demands while reducing the energy lost through mechanical throttling.
It delivers a continuous mechanical output of 30 kW, equivalent to 40 HP, so it suits midrange centrifugal loads. The input section accepts 200–240 VAC three-phase power at the nominal utility frequency of 50/60 Hz. Internal vector control keeps conversion losses low, providing an efficiency of 0.97. A displacement power factor of >0.98 and a true power factor of at least 0.9 limit reactive current draw. The drive produces motor voltages ranging from 0% to 100% of the supply voltage to maintain torque across the operating speed range, provided the line-to-line voltage imbalance remains within 3%. These electrical characteristics support operation on common low-voltage industrial power systems used for pump and fan motors.
Startup and stopping profiles are governed by an adjustable acceleration or deceleration time of 1–3600 s, while the output frequency ranges from 0–590 Hz for overspeed cleaning cycles or low-speed priming. The isolated digital output can supply 40 mA and switch at 32 kHz for pulse-based control signals. Operation is permitted at an ambient temperature of up to 50 °C before derating is required, and upstream short-circuit protection is provided by a 160 A fuse. Motor cabling may extend up to 150 m with shielded conductors or 300 m with unshielded conductors without exceeding the stated carrier-loss limits. The adjustable ramp range also allows gradual speed changes that can reduce hydraulic shock during pump starts and stops.
