FC-202P30KT2131F1086 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P30KT2131F1086 is part of the VLT FC 202 AQUA Drives series and is designed for three-phase power with a mains voltage of 200 to 240 VAC. It delivers a power rating of 30 kW and a continuous output current of 115 A, supporting up to 40 horsepower. The drive achieves an efficiency of 0.97 and can output frequencies up to 590 Hz. It features 8-bit analog output resolution and a maximum analog output load of 500 ohms.
Internal Product Review
The FC-202P30KT2131F1086 is a Danfoss VLT FC 202 AQUA drive with a 30 kW rating and three-phase power input. An efficiency of 0.97 and continuous output current of 115 A support strong energy performance and stable motor control in demanding process systems. A 200 to 240 VAC mains range and 590 Hz maximum output frequency make this unit a highly capable choice for AQUA applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P30KT2131F1086 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Designed for pump and fan applications in water treatment, it converts fixed-frequency three-phase mains power into a speed-controlled output for induction motors, allowing flow and pressure to follow process demand. Its control algorithms prioritize reduced hydraulic transients and energy savings during continuous industrial operation.
The drive accepts 200–240 VAC three-phase mains power and delivers a continuous motor current of 115 A. At 208 V, this current corresponds to 41.4 kVA of apparent power and supports motors rated up to 40 HP. Full-load efficiency is 0.97, so only a small portion of the input energy becomes heat during operation. Analog supervision is provided by an 8-bit current loop that can drive loads with an impedance of 500 Ω. The digital output can source up to 40 mA for status relays or counters. During short process surges, the inverter tolerates an output current of 127 A and an input current of 114 A without exceeding its thermal limits.
The drive supports a maximum fundamental frequency of 590 Hz and carrier frequencies up to 32 kHz, enabling operation with high-speed submersible or booster pumps. Line protection is coordinated with a prefuse rated at 160 A. The design permits a phase imbalance of up to 3.0% while keeping DC-link ripple within an acceptable range. Expected internal power dissipation is 1140 W, which should be considered when sizing enclosure ventilation for panel-mounted installations. Under normal duty, the input current ceiling is 104 A, and conductor ampacity should accommodate this operating level. These electrical values apply to a three-phase supply with voltage dips that remain within the permitted mains range.
