FC-202P30KT2131F1062 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P30KT2131F1062 is a 40 HP drive from the VLT FC 202 AQUA Drives series with a power rating of 30 kW and operates on three phase power at 200 to 240 VAC. It features an analog input bandwidth of 200 Hz, two 10-bit analog inputs, and a maximum output frequency of 590 Hz. The drive has an efficiency of 0.97 and supports maximum ambient temperatures up to 50 degrees Celsius.
Internal Product Review
The FC-202P30KT2131F1062 is a Danfoss VLT FC 202 AQUA drive rated at 30 kW for three-phase power applications. Operating efficiency of 0.97 and a 200 to 240 VAC mains range support stable, energy-conscious integration in water handling systems. Output frequency up to 590 Hz makes the unit a strong choice for demanding process control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P30KT2131F1062 is an AC variable-frequency drive manufactured by Danfoss and supplied within the VLT FC 202 AQUA Drives series. Designed for pump, fan, and blower control in water-handling facilities, the unit adjusts motor speed to maintain flow or pressure while reducing energy use and mechanical stress on induction motors. Integrated control terminals and application macros allow direct connection to level transmitters, PLCs, or building-management controllers without external signal conditioners. It is suited to variable-torque duties where soft starts and controlled stops help stabilize process flow.
The drive’s power section is sized for 40 HP motors and reaches an operational efficiency of 0.97 under load, which helps limit heat loss inside control panels. Two programmable analog inputs accept process signals, and their bandwidth of 200 Hz allows quick response to pressure changes. The drive provides 2 analog channels, and conversion is handled with 10 bit resolution for steady setpoint tracking. Built-in proportional and PID control can use these signals directly, so external loop hardware is unnecessary. Digital I/O lines tolerate input voltages up to 28 VDC and can source 40 mA from transistor outputs for relay or opto-isolator signaling.
The mains section accepts three-phase supplies from 200 – 240 VAC, making the unit suitable for low-voltage utility feeds used in many water and wastewater facilities. Motor output frequency can be increased to 590 Hz, which supports applications that need an extended speed range during special operating cycles. Acceleration and deceleration times are adjustable up to 3600 s, allowing gradual ramping that helps reduce hydraulic shock in connected piping. Continuous operation is permitted up to 1000 m above sea level without current derating, and ambient temperature may reach 50 °C before thermal limiting begins. The drive also accepts 3% line imbalance, uses a 160 A pre-fuse rating, supports 30 kW shaft output, and allows motor-cable distances of 150 m shielded or 300 m unshielded for remote pump installations.
