FC-202P30KT2131B9537 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P30KT2131B9537 is part of the VLT FC 202 AQUA Drives series and delivers a power rating of 30 kW with a horsepower of 40 HP. It operates at a mains voltage of 200 to 240 VAC with three phase power and offers an efficiency of 0.97. The drive provides a continuous output current of 115 A and includes one analog and two digital outputs.
Internal Product Review
The FC-202P30KT2131B9537 is a Danfoss VLT FC 202 AQUA drive rated for 30 kW operation on 200 to 240 VAC mains. Efficiency of 0.97 and continuous output current of 115 A support stable, energy-conscious performance in demanding pump and fan systems. Three-phase power architecture makes this unit an excellent choice for consistent AQUA drive service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P30KT2131B9537 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It converts three-phase AC mains power into a pulse-width-modulated output that allows centrifugal pump or blower speed to be adjusted in water-handling installations. By matching motor torque to real-time flow demand, the drive reduces energy consumption, mitigates hydraulic shock, and supports process stability in industrial automation. The variable-frequency output also allows pumping systems to respond to changing pressure or flow requirements without relying entirely on mechanical throttling.
The power stage accepts a continuous input current of 104 A and delivers a nominal output current of 115 A, while overall conversion efficiency reaches 0.97. Apparent power is rated at 41.4 kVA when the supply voltage is 208 V, consistent with the unit’s three-phase topology. It operates directly on 200–240 VAC grids, eliminating the need for step-down transformers in low-voltage plants. Motor output is rated at 30 kW, which corresponds to 40 HP and supports midsize submersible or end-suction pumps. One 8-bit analog output and two digital outputs convey speed or fault data to supervisory PLCs. The intermittent input current is 114 A, providing an additional value for conductor and protective-device selection.
For startup surges, the inverter can supply 127 A for brief intervals, and upstream protection uses a 160 A fuse. Reflected-wave performance over 15 m of shielded cable produces a peak voltage of 0.626 kV with a rise time of 0.194 µs. The resulting slew rate is 2.581 kV/µs, which remains within typical motor insulation limits. Full-load thermal dissipation is 1,143 W, so enclosure ventilation must remove approximately one kilowatt of heat during continuous operation. The drive carries Series Identifier 202 and is intended for variable-torque hydraulic machinery. Its control capabilities accommodate applications in which pump speed must change in response to process measurements or supervisory commands.
