FC-202P2K2T6134U5909 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P2K2T6134U5909 is a 3 horsepower drive from the VLT FC 202 AQUA Drives series, offering a power rating of 2.2 kW and an efficiency of 0.97. It supports three phase power, provides an output current of 4.1 A at 550 V, and operates at a maximum ambient temperature of 50 degrees Celsius. The drive can use shielded motor cables up to 150 meters and unshielded motor cables up to 300 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P2K2T6134U5909 is a variable frequency drive built by Danfoss for the VLT FC 202 AQUA Drives series within the VLT AQUA Drive product group. It converts fixed-frequency mains power into a regulated output that matches pump or fan demand, reducing hydraulic surges and energy use in water treatment, irrigation, and distribution systems. Integration with plant controllers allows the unit to regulate motor torque and speed while maintaining the electrical and mechanical format used by the 202 series.
With a 550 V supply, the drive has an apparent power of 3.9 kVA and draws a continuous input current of 4.1 A. It delivers an output current of 4.1 A at 550 V or 3.9 A when the DC bus is supplied with 600 V. Its power stage has an efficiency of 0.97, which limits power loss to 92 W at full load. The mechanical shaft output is rated at 3.0 HP, corresponding to an electrical power rating of 2.2 kW. The drive operates with three-phase power and connects directly to standard 380–600 V three-phase grids. Cable terminals accommodate conductors up to 4 mm² for the mains input and motor leads, while a separate 6 mm² conductor can be used for the upstream disconnect device.
The enclosure can operate at ambient temperatures up to 50 °C without derating and down to 0 °C during continuous duty, provided the installation altitude does not exceed 1000 m. Shielded motor cable may extend up to 150 m, while unshielded leads can extend to 300 m when electromagnetic compatibility requirements are met. Incoming feeder protection is provided by a maximum pre-fuse rating of 20 A. The drive permits a 150% overload for short intervals, supporting the temporary torque demands that can occur when pumps accelerate or encounter changes in system pressure. Its conductor capacity and feeder protection requirements support field wiring in industrial pump stations and similar water-handling systems.
