FC-202P2K2T4131B8903 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P2K2T4131B8903 is a drive from the VLT FC 202 AQUA Drives series, designed for three phase power and operates with a power rating of 2.2 kW and 3.0 HP. It has an efficiency of 0.97 and supports mains voltages from 380 to 480 VAC, with a maximum output frequency of 590 Hz. At 400 V, it delivers a continuous output current of 5.6 A and handles up to 3.9 kVA.
Internal Product Review
The FC-202P2K2T4131B8903 is a Danfoss VLT FC 202 AQUA drive engineered for 380-480 VAC three-phase power. High 0.97 efficiency and a 2.2 kW power rating support stable, energy-conscious motor control in continuous service. A maximum output frequency of 590 Hz stands out as a strong capability for demanding variable-speed applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P2K2T4131B8903 is a variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It converts fixed-frequency three-phase power into a controllable output for pump and blower motors in water-treatment facilities. The adjustable output allows connected equipment to match real-time flow or pressure demands. This control can improve process accuracy and reduce energy use in industrial automation applications.
The drive operates from a 380–480 V AC mains supply and accepts three-phase power without an external transformer. With a 400 V line supply, it can deliver a continuous apparent power of 3.9 kVA, while its apparent power rating at 460 V is 3.8 kVA. Continuous output current reaches 5.6 A on 380–440 V networks and 4.8 A when the input is between 441 and 480 V. These current ratings support the selection of suitable overload protection and cable sizes for the connected motor. An efficiency of 0.97 indicates that only a small portion of the input energy is lost as heat, which supports efficient operation in water and wastewater systems.
An estimated power dissipation of 88 W must be removed through panel ventilation to help maintain acceptable component temperatures. The rated shaft output is 3.0 HP, which corresponds to 2.2 kW and supports midsize centrifugal pumps commonly used in distribution loops. For applications that require high impeller speeds, the inverter can generate output frequencies up to 590 Hz. Maximum input demand rises to 5.0 A on 380–440 V supplies and 4.3 A on 441–480 V supplies. A 20 A pre-fuse protects the upstream circuitry from excessive current. The terminals for disconnect devices accommodate conductors up to 6 mm², while the motor terminals accept conductors up to 4 mm². Shielded motor cable runs can extend as far as 150 m without exceeding the drive’s filter limits.
