FC-202P2K2T2131Z6098 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P2K2T2131Z6098 is a three phase AC drive from the VLT FC 202 AQUA Drives series. It has a continuous output current of 10.6 Amps and supports a mains voltage range of 200 to 240 VAC with a power rating of 2.2 kilowatts. The drive features two analog inputs with 10 bit resolution and reaches up to 96% efficiency.
Internal Product Review
The FC-202P2K2T2131Z6098 is a Danfoss VLT FC 202 AQUA drive rated at 2.2 kW for 200 to 240 VAC operation. A 5 ms control card scan interval and 0.96 efficiency support responsive control and efficient performance in fluid-handling systems. Three-phase power capability makes the unit a strong choice for dependable water and process drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P2K2T2131Z6098 is a variable frequency drive from Danfoss in the VLT FC 202 AQUA Drives series. The unit regulates the output frequency supplied to centrifugal pumps and fans, allowing motor speed to follow changing process demand. This control helps maintain the required flow or pressure in automated water and wastewater installations without relying solely on mechanical throttling.
The drive is designed for a three-phase mains supply of 200–240 VAC and delivers a rated mechanical output of 2.2 kW. Its power stage provides 3.82 kVA of apparent power for converting the incoming supply into a controlled motor output. During steady operation, the input draws 9.5 A, while the inverter supplies up to 10.6 A of continuous motor current. The drive operates with an efficiency of 0.96, which reduces the proportion of input energy converted into internal heat. Its three-phase input arrangement distributes the electrical load across the supply phases and supports operation with compatible industrial pump and fan motors.
The control card completes a parameter sweep every 5 ms, allowing the two analog inputs to be sampled at 10-bit resolution for accurate feedback scaling in level or pressure control loops. One analog output is available for valve positioning or remote indication, and it can support loads down to 500 Ω without clipping. The digital transistor output can sink 40 mA, allowing status signals to reach standard PLC inputs directly. Supply protection calls for a 20 A upstream fuse, which helps coordinate feeder protection with the drive’s electrical requirements. Heat dissipation inside the housing is limited to 116 W, and continuous operation is permitted at ambient temperatures up to 50 °C. Shielded motor cables may be used for runs up to 150 m, while unshielded cables may extend to 300 m when the installation conditions permit their use.
