FC-202P2K2T2131G9771 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P2K2T2131G9771 is part of the VLT FC 202 AQUA Drives series and supports three phase power with a power rating of 2.2 kW and 3.0 HP. It features 2 analog inputs, 1 analog output, and handles continuous output current of 10.6 Amps while operating on 200 to 240 VAC mains voltage. The drive has a maximum shielded motor cable length of 150 meters and an efficiency of 0.96.
Internal Product Review
The FC-202P2K2T2131G9771 is a Danfoss VLT FC 202 AQUA drive rated for 2.2 kW and 3.0 HP. A 200 to 240 VAC supply range and 0.96 efficiency give the unit strong electrical performance for water and pump duty. Maximum unshielded motor cable support of 300 m is a standout advantage for flexible AQUA drive installation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P2K2T2131G9771 is an AC variable-frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It modulates three-phase power to regulate centrifugal pumps, blowers, and other water-handling equipment found in treatment plants or irrigation systems. The unit maps process signals through two analog inputs and one analog output so a PLC can coordinate flow and pressure without additional signal converters.
The drive accepts commands through 2 galvanically isolated analog input channels and reports actual values through 1 analog output, simplifying closed-loop control. Its power stage is rated for a continuous apparent power of 3.82 kVA when supplied from 200–240 VAC mains. A conversion efficiency of 0.96 limits wasted energy, while continuous input current is 9.5 A and intermittent input current rises to 14.3 A for brief acceleration events. The motor terminals can deliver 3.0 HP of mechanical output while sustaining 10.6 A rms, and upstream protection uses a 20 A prefuse. The inverter accommodates shielded motor leads up to 150 m and unshielded runs up to 300 m, maintaining pulse fidelity for distant submersible pumps. A 4 mm² (12 AWG) power cable cross section meets thermal and voltage-drop limits.
The electronic section provides a power rating of 2.2 kW, matching small and medium-frame motors used in booster skids. Continuous output current is held at 10.6 A, while an intermittent ceiling of 15.9 A supplies extra torque for valve stroking or pipe-filling sequences. The thermal design caps internal dissipation at 116 W, so standard panel ventilation is sufficient. Its three-phase topology balances line loading and reduces harmonic distortion compared with single-phase solutions. Series Identifier 202 groups the drive with products that use the same mechanical footprint and keypad layout.
