FC-202P2K2T2131B9175 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P2K2T2131B9175 is part of the VLT FC 202 AQUA Drives series. This three phase drive offers a power rating of 2.2 kW with an output frequency range of 0 to 590 Hz and operates on 200 to 240 VAC mains voltage. It provides an efficiency of 0.96 and supports a continuous output current of 10.6 A.
Internal Product Review
The FC-202P2K2T2131B9175 is a Danfoss VLT FC 202 AQUA drive rated for 2.2 kW on 200–240 VAC mains. Efficiency of 0.96 and a displacement power factor above 0.98 support clean, economical operation in water and process duty applications. Output frequency up to 590 Hz stands out as a strong advantage for flexible speed control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P2K2T2131B9175 is an AC drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It belongs to the VLT AQUA Drive product group and is intended for automated pump and fan applications where variable-speed operation can improve energy efficiency and process control. The drive regulates motor speed to match changing flow or pressure requirements in water and wastewater systems. Its panel-mounted format allows integration with the power distribution and control equipment used in fluid-handling installations.
On the input side, the drive accepts a mains supply of 200–240 VAC with a rated frequency of 50/60 Hz and a tolerance of +4/-6%. It draws 9.5 A continuously under rated operating conditions and provides a motor-side apparent power of 3.82 kVA. The inverter supplies a continuous output current of 10.6 A, while its output voltage can be adjusted from zero to 100% of the incoming line voltage. The drive has an efficiency of 0.96, with approximately 116 W dissipated as heat during nominal operation. A displacement power factor greater than 0.98 and a true power factor of at least 0.9 help reduce losses in the upstream electrical system. The 2.2 kW power rating is suitable for medium-duty pumps, fans, and related equipment. A 20 A input fuse provides branch-circuit protection when selected and installed according to the applicable electrical requirements.
The inverter supports motors rated up to 3.0 HP and provides an output frequency range of 0–590 Hz. Programmable acceleration and deceleration times can be set between 1 and 3,600 seconds, allowing gradual speed changes that reduce hydraulic shock and mechanical stress. The unit operates on three-phase power and supports shielded motor cables up to 150 meters long without exceeding the stated electromagnetic compatibility limits. Ambient air temperature may reach 50 °C before output derating is required. The adjustable output allows the drive to regulate pump or fan speed in response to external commands and process feedback. This control capability is suitable for applications that require steady pressure, controlled flow, or reduced motor speed during periods of lower demand.
