FC-202P2K2S2131Z0771 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P2K2S2131Z0771 is part of the VLT FC 202 AQUA Drives series and is designed for single phase power with a mains voltage range of 200 to 240 VAC. This drive has a power rating of 2.2 kW, a continuous output current of 10.6 A, and operates with an efficiency of 0.98. It supports a maximum output frequency of 590 Hz and a maximum ambient temperature of 50 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P2K2S2131Z0771 drive is manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It is used in industrial and municipal pumping systems to match motor speed to changing flow demands, which can reduce energy consumption and mechanical stress. Its variable-frequency output supports controlled acceleration, steady pressure regulation, and smoother pump operation as process conditions change. The drive can regulate compatible motors in applications such as water distribution, wastewater processing, irrigation, and building services.
This model operates from a single-phase input and accepts 200–240 VAC mains power. Its power section is rated at 2.2 kW, which corresponds to 3.0 HP, and it can deliver 3.8 kVA of continuous apparent power. Under nominal load, the inverter supplies a continuous output current of 10.6 A while dissipating 44 W of heat. Its efficiency reaches 0.98, helping limit electrical losses during steady process operation. The maximum input current is 20.5 A, and conductors must have insulation rated for 75 °C. The main protective device must also be selected for conductors rated at 75 °C. The single-phase supply arrangement must be maintained when sizing and connecting the mains cable.
During short-term load events, the drive supports an intermittent input current of 22.6 A and an intermittent output current of 11.7 A. The control stage can generate output frequencies up to 590 Hz, permitting high-speed operation when the connected motor and pump are suitable for that frequency. The drive can operate at an ambient temperature of up to 50 °C without derating when cabinet airflow remains unobstructed. Upstream circuit protection requires a 40 A pre-fuse to limit fault current and protect the supply conductors. The motor lead can extend to 150 m when shielded cable is used, providing flexibility for installations where the drive and pump are separated. Cable routing must preserve shielding continuity and allow adequate spacing for ventilation around the enclosure.
