FC-202P22KT6134F4112 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P22KT6134F4112 is part of the VLT FC 202 AQUA Drives series and operates with a power rating of 22 kW and 30 horsepower. It is designed for three-phase power at a supply voltage of 525–600 V AC and features drive efficiency of 0.98. The drive supports output frequencies from 0 to 590 Hz and can operate at ambient temperatures up to 50°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P22KT6134F4112 is a variable frequency drive manufactured by Danfoss and offered in the VLT FC 202 AQUA Drives series. It converts fixed three-phase line power into a regulated output that matches the demand of centrifugal pumps and fans. By matching motor speed to process demand, the drive allows automated systems in water treatment, irrigation, and wastewater plants to maintain pressure and flow without relying on mechanical throttling. This variable-speed operation can also reduce unnecessary motor loading when the required flow rate falls below the system’s maximum capacity.
On the input side, the drive accepts a 525–600 V AC three-phase supply and operates on a 50/60 Hz line within a +4/-6% frequency window. It delivers an output voltage from 0 to 100% of the incoming level and provides a programmable frequency range of 0–590 Hz, enabling very low or oversynchronous motor speeds. Continuous motor output is rated at 22 kW, which corresponds to 30 HP. Acceleration and deceleration ramps are adjustable from 1 to 3600 seconds, allowing motor speed changes to be matched to pump and process requirements. Upstream circuit protection may use fuses rated up to 60 A to meet short-circuit clearing requirements and protect the incoming power circuit.
The inverter section reaches a drive efficiency of 0.98 and maintains a displacement power factor above 0.98. The true power factor remains at least 0.9, which helps minimize reactive current drawn from the supply. Motor leads can extend to 150 m when shielded or 300 m when unshielded without exceeding the output filtering limits. Full current remains available at ambient temperatures up to 50 °C, and operation can continue at elevations up to 1000 m without derating. Installation is permitted at elevations up to 3000 m when the output current is reduced proportionally. The drive also tolerates supply voltage variations of ±10%, supporting operation on electrical grids that experience periodic voltage fluctuations.
