FC-202P22KT6131Z3000 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P22KT6131Z3000 is part of the VLT FC 202 AQUA Drives series and has a power rating of 22 kW with a maximum output frequency of 590 Hz. This drive supports three phase power, delivers 30 horsepower, and achieves an efficiency of 0.98. It provides a maximum continuous output current of 34 A at 600 V and operates in ambient temperatures up to 50°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P22KT6131Z3000 is an AC variable frequency drive manufactured by Danfoss and assigned to the VLT FC 202 AQUA Drives series. It converts fixed-frequency, three-phase mains power into a regulated output that lets plant controllers adjust centrifugal pump and fan speeds, optimizing flow and reducing energy demand in water treatment installations. As part of an integrated automation system, the drive sits between the facility power bus and the induction motor, providing programmable acceleration, deceleration, and overload protection without external mechanical throttles.
On the electrical side, the inverter draws a continuous input of 31 A from a 575 V supply and can feed 34 A to the motor terminals at 600 V. This duty equates to 33.9 kVA of apparent power while supporting motor ratings of 30 HP or 22 kW. A high conversion efficiency of 0.98 limits power dissipation to 440 W, so most of the incoming energy reaches the load. The drive operates on three-phase power, and a 60 A prefuse protects the upstream wiring. Startup and shutdown profiles are adjustable up to 3,600 seconds, allowing gradual load engagement. The analog feedback channel supports loads down to 500 Ω for instrumentation loops. Input phase imbalance must remain below 3.0 percent. These electrical characteristics support stable torque delivery during the long operating cycles commonly required by midrange pump stations.
The electronics tolerate ambient temperatures up to 50 °C without derating when the enclosure has adequate ventilation. An output frequency ceiling of 590 Hz accommodates high-speed submersible motors that require an extended operating range. Cable routing is flexible because shielded motor leads may reach 150 m, while unshielded runs may extend to 300 m before exceeding the drive’s filter requirements. These cable allowances support installations in which the motor is positioned away from the control enclosure, such as remote well fields or distributed treatment skids. Proper cable selection and routing help control electromagnetic interference while maintaining reliable power delivery to the connected motor.
