Product Description:

The FC-202P22KT4E66H2XGC3SXSXXXXANBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It regulates centrifugal pumps, aerators, and blowers in water and wastewater installations, allowing flow and pressure to follow real-time demand while reducing energy use and mechanical wear on connected motors. This type of drive is used where motor speed must be adjusted instead of running at full output at all times, which helps stabilize system performance during changing process demand. Its control functions suit process equipment that must respond smoothly to load changes during continuous operation.

It accepts a supply of 380 – 480 VAC on three-phase power, and its inverter section delivers up to 22 kW to the motor. The enclosure has an IP66 / NEMA 4X rating, so it resists dust, high-pressure water, and corrosive atmospheres common in pump rooms. An integrated RFI filter limits conducted emissions. The smooth imperial cable entry adaptation provides strain-relieved conduit sealing, and coated printed circuit boards protect the control electronics against condensation. This layout allows installation close to pumps and ventilation equipment where washdown and airborne moisture are more likely than in a protected control room. The casting carries the numeric series identifier 202, and Adaptation B does not include a secondary mechanical adaptation.

Slot A contains the EtherNet/IP MCA 121 module for high-speed communication, and local operation is handled through the graphical local control panel. EtherNet/IP connectivity supports integration with plant control systems that exchange run commands, status signals, and process values over the network. A built-in mains disconnect and fuse assembly isolates the inverter during service. The power stage is sized for 30 HP motors used on mid-range pumps. Safety braking hardware is not installed, so a brake chopper is not present.