FC-202P22KT4131X9036 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P22KT4131X9036 is part of the VLT FC 202 AQUA Drives series and is rated for three phase power with a mains voltage of 380 to 480 VAC. This drive supports a power rating of 22 kW and 30 horsepower, with a maximum output current of 40 Amps and continuous input current of 36 Amps. It carries an IE2 energy efficiency class and operates at ambient temperatures up to 50 °C with a maximum relative humidity of 95%.
Internal Product Review
The FC-202P22KT4131X9036 is a Danfoss VLT FC 202 AQUA drive with a 22 kW power rating and 30 HP capacity. Three-phase operation across 380 to 480 VAC and 40 A continuous output current supports stable motor control in demanding pump and fan applications. IE2 efficiency and a 50 °C maximum ambient temperature make the drive a strong fit for energy-conscious installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P22KT4131X9036 is a variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. The device converts constant utility power into a modulated output that lets plant controllers vary the speed of centrifugal pumps and fans in water-handling processes. By matching motor speed to process demand, the drive supports energy conservation and pressure stability across filtration, distribution, and aeration equipment. It is intended for three-phase installations where direct-on-line starting would otherwise cause hydraulic shock or excessive inrush current.
The drive accepts a three-phase power supply of 380–480 VAC and delivers up to 22 kW of shaft power. Its power section provides 40 A of continuous motor current, while line demand remains at 36 A. A 60-second overload capability of 44 A permits rapid ramp-up or pipe-cleaning sequences without interrupting service. The control electronics handle digital input signals up to 28 V DC and can switch digital outputs at 32 kHz for flow-meter pulses or fault relays. The analog output stage supports loads down to 500 Ω, allowing direct retransmission of speed or process variables to supervisory equipment. These signal interfaces allow the drive to respond to external commands and report operating data through standard automation connections.
The unit is classified in the IE2 energy-efficiency class and operates without derating at altitudes up to 1000 m. Ambient temperatures may reach 50 °C, while operation can begin at 0 °C and continue in air with up to 95% relative humidity. Circuit protection requires a maximum upstream fuse rating of 63 A. Motor leads may extend 150 m when shielded or 300 m when unshielded, providing flexibility for installations with remote pump rooms. Cable glands accommodate the three-phase power conductors required for this power rating. The drive maintains full performance with shielded motor cables that remain within the stated length limit.
