FC-202P22KT4131B9019 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P22KT4131B9019 is a 30 horsepower drive from the VLT FC 202 AQUA Drives series. It operates at 380 to 480 VAC three phase power with a power rating of 22 kW and a maximum output frequency of 590 Hz. The drive supports a continuous output current of 44 amps and achieves an efficiency of 0.98.
Internal Product Review
The FC-202P22KT4131B9019 is a Danfoss VLT FC 202 AQUA drive designed for 22 kW service. An efficiency of 0.98 and a true power factor of at least 0.9 support highly effective, stable operation in demanding water-handling systems. A continuous output current of 44 A stands out as a key performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P22KT4131B9019 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Installed between a plant’s three-phase supply and an induction motor, it produces a variable output that allows automation controllers to match pump or blower speed to real-time flow requirements. This arrangement reduces hydraulic shock during startup and limits energy use in industrial and municipal water processes where the load changes continuously.
The drive delivers a continuous apparent power of 30.5 kVA when connected to a 380–480 VAC mains supply. During operation, it draws 40 A of line current and can supply up to 44 A at its output terminals to accommodate demanding motor loads. Internal power conversion provides an efficiency of 0.98, and the unit carries an IE2 energy-efficiency classification. A true power factor of at least 0.9 keeps reactive current low, while the design tolerates a phase-to-phase voltage imbalance of 3.0% without derating. The equipment withstands vibration of 1.0 g and permits one power-up per minute to protect the DC-link capacitors. Shielded motor cables can be up to 150 m long, allowing the enclosure to be installed away from wet areas. The three-phase input configuration is suitable for common industrial and municipal power distribution systems.
The electronic platform has a nominal electrical output of 22 kW. It can generate carrier-controlled waveforms with a maximum fundamental frequency of 590 Hz, allowing compatible high-speed pumps to operate across a broad speed range. A programmable ramp time of up to 3,600 seconds minimizes pressure transients during acceleration and deceleration. The drive can operate at altitudes up to 1,000 m without thermal derating. Continuous service is available in ambient temperatures as high as 50 °C, provided that adequate cabinet airflow is maintained. Full output ratings remain available when the incoming mains supply stays within the permitted voltage limits.
