FC-202P22KT2131B9286 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-202P22KT2131B9286 is a VLT FC 202 AQUA Drive by Danfoss that supports a power rating of 22 kW or 30 HP and is designed for three phase power at 200 to 240 VAC. This drive has one analog output and two digital outputs, features a maximum output frequency of 32 kHz, and can operate at ambient temperatures up to 50 degrees Celsius. It is suitable for installation at altitudes up to 1000 meters, with derating up to 3000 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P22KT2131B9286 is a variable frequency drive engineered by Danfoss for centrifugal pump and blower regulation as part of the VLT FC 202 AQUA Drives series. By converting fixed-frequency mains power into a pulse-width-modulated output, it allows controllers to adjust motor speed according to hydraulic demand in water treatment, irrigation, and municipal supply systems while reducing energy consumption. The unit supports dedicated pump functions such as flow compensation and sleep mode, making it suitable for automated fluid-handling systems that must respond efficiently to changing flow requirements.
The power section delivers a continuous mechanical output of 22 kW, which is suitable for midrange pump motors used in small stations. It accepts an input range of 200–240 VAC from a three-phase power supply, and the maximum upstream fuse rating is 125 A. One analog output drives loads up to 500 Ω, provides 8-bit resolution, and limits full-scale error to 0.8%. Two digital outputs can source up to 40 mA each for contactor coils or indicator lamps, while frequency commands in the control system are calculated with 12-bit resolution for precise proportional regulation. These control connections allow the drive to exchange operating signals with external automation equipment without requiring additional output modules.
The drive maintains its full rating at ambient temperatures up to 50 °C and elevations up to 1000 m, after which stepped derating permits operation at elevations as high as 3000 m. Logic terminals tolerate control signals up to 28 V DC, providing compatibility with common low-voltage control circuits. The output can switch at a maximum frequency of 32 kHz, supporting quieter motor operation where higher carrier frequencies are appropriate. Power can be routed through up to 150 m of shielded motor cable or 300 m of unshielded motor cable, allowing the motor to be installed far from the control panel while remaining within the drive’s cable-length limits. Proper cable selection also helps control electromagnetic interference and capacitive loading in installations with long motor leads.
