FC-202P22KT2131B9282 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P22KT2131B9282 is part of the VLT FC 202 AQUA Drives series and offers a power rating of 22 kW with a 30 horsepower output. It operates on a mains voltage of 200 to 240 VAC with a normal overload output current of 88.0 A and efficiency of 0.97. The drive is designed for three phase power and supports a maximum ambient temperature of 50 degrees Celsius.
Internal Product Review
The FC-202P22KT2131B9282 is a Danfoss VLT FC 202 AQUA drive engineered for three-phase power at 200 to 240 VAC. Efficiency of 0.97 and a 30 HP rating support strong, energy-conscious performance in demanding pump and fan applications. A 150 m shielded motor cable capacity makes the unit an excellent choice for distributed installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P22KT2131B9282 is a variable-frequency inverter manufactured by Danfoss for the VLT FC 202 AQUA Drives series. As part of the VLT AQUA Drive product group, it regulates centrifugal pumps and fans used in water treatment, distribution, and irrigation systems. The drive matches motor speed to real-time load demands, helping conserve electrical power and reduce mechanical stress on connected equipment.
This drive operates from a three-phase supply at 200–240 VAC and reaches a high-overload output of 74.8 A for duty cycles lasting up to 60 seconds. During normal overload operation, the output limit increases to 88.0 A, accommodating temporary pressure surges without nuisance trips. Its continuous power capability is 22 kW, which corresponds to 30 HP for standard induction motors. The drive has an energy efficiency factor of 0.97 and an IE2 efficiency classification, helping minimize conduction and switching losses. A line-side pre-fuse rated at 125 A protects upstream wiring against short-circuit faults. The drive maintains full current at altitudes up to 1,000 m and remains functional at 0 °C under full load or at -10 °C under light load, making it suitable for unheated pump rooms.
Field wiring can use copper conductors with cross-sectional areas up to 50 mm². Shielded motor leads may extend up to 150 m between the cabinet and motor, while unshielded runs are permitted up to 300 m when electromagnetic compatibility requirements allow. The enclosure tolerates ambient temperatures up to 50 °C before derating is required, and operation with reduced output remains possible at altitudes up to 3,000 m above sea level. The drive withstands vibration levels of 1.0 g, supporting operation on skid-mounted assemblies and in common building-service environments.
