FC-202P22KS2134F9796 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P22KS2134F9796 is part of the VLT FC 202 AQUA Drives series and has a power rating of 22 kW with a maximum efficiency of 0.98. This drive operates on 200 to 240 VAC single phase power, delivers a continuous output current of 88 A, and provides a rated horse power of 30 HP. The enclosure size is C2, featuring an overload rating of 110 percent for 1 minute and supports motor cable lengths up to 150 meters shielded or 300 meters unshielded.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P22KS2134F9796 is an AC variable frequency drive produced by Danfoss as part of the VLT FC 202 AQUA Drives series within the VLT AQUA Drive product group. Designed for pump and fan duty in water and wastewater facilities, the drive modulates motor speed to match flow demand, reducing energy consumption and mechanical stress on system components. It accepts single-phase power from low-voltage mains and converts it into a regulated three-phase output for induction or permanent-magnet motors used in automated process equipment. This conversion allows compatible three-phase motors to operate where the available supply is single-phase.
Its continuous motor output is rated at 22 kW, equivalent to 30 HP, allowing it to operate midsize centrifugal pumps. The input section is rated for a mains voltage of 200–240 VAC and supports a continuous input current of 172 A while producing a continuous output current of 88 A at the inverter terminals. At 208 V, the converter can supply an apparent power of 31.7 kVA, providing capacity for reactive load components. The C2 enclosure provides space for cabling and airflow within the installation. Internal thermal management limits the estimated power loss to 440 W during operation at the nominal load.
The drive has an operating efficiency of 0.98, meaning approximately 2% of the input power is dissipated as heat. For short demand peaks, the drive can sustain an overload of 110% for one minute, with intermittent current limits of 189.2 A on the line side and 96.8 A on the motor side. Upstream protection supports a maximum pre-fuse rating of 200 A. Downstream wiring can extend up to 150 m when a shielded motor cable is used, while unshielded conductors permit a maximum length of 300 m. All conductors must have insulation rated for 75 °C to meet the drive terminal requirements. These cable limits help control electrical interference and voltage effects across longer motor connections.
