FC-202P1K5T6136H9383 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K5T6136H9383 is part of the VLT FC 202 AQUA Drives series and features a power rating of 1.5 kW with a 2.0 HP output. This drive has an efficiency of 0.97, is designed for 525–600 V AC three-phase power, and supports a maximum output frequency of 590 Hz. It operates at a maximum ambient temperature of 50 °C and can handle input currents up to 2.4 A.
Internal Product Review
The FC-202P1K5T6136H9383 is a Danfoss VLT FC 202 AQUA Drive built for dependable variable-frequency control in water and industrial duty. The 1.5 kW power rating and 525–600 V AC input make this model a strong fit for stable three-phase installations. IE2 efficiency and a maximum output frequency of 590 Hz highlight efficient operation with excellent speed-control range.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T6136H9383 is a high-voltage variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. This model belongs to the VLT AQUA Drive product group and carries the internal 202 series identifier. It is intended for pump and fan control in water and wastewater plants, where closed-loop speed regulation helps maintain constant pressure, minimize water hammer, and reduce energy consumption in automated distribution, treatment, and irrigation systems.
The drive accepts a three-phase input of 525–600 V AC, allowing direct connection to a compatible industrial power supply without a step-down transformer. Its power section is rated at 1.5 kW and supplies up to 2.4 A of continuous motor current, while a 10 A prefuse protects upstream conductors. Operating efficiency reaches 0.97, meeting the IE2 efficiency class and keeping heat generation low. For dynamic applications, the inverter can produce output frequencies up to 590 Hz, supporting high-speed centrifugal pumps or oversynchronous cleaning cycles. The maximum conductor size for the line or motor connection is 4 mm². The disconnect terminal accommodates service wiring with a conductor size of up to 6 mm².
Continuous apparent power is 2.8 kVA at 550 V, and the thermal design limits internal power dissipation to 65 W. The unit operates without derating at ambient temperatures up to 50 °C and at installation heights up to 1000 m. Shielded motor cable can extend up to 150 m, while unshielded cable can extend up to 300 m, allowing the drive to be installed away from the pump room. Ground-fault detection monitors the connected motor feeders and helps protect the drive during operation. A removable front disconnect links the prefuse to the power stage and allows the incoming supply to be isolated for service. The drive uses a three-phase topology that helps limit harmonic distortion across the supported input-voltage range.
