FC-202P1K5T6136G6191 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K5T6136G6191 is a VLT FC 202 AQUA Drive with a power rating of 1.5 kW and 2.0 horsepower. This three phase drive has an efficiency of 0.97 and an IE2 energy efficiency class. It supports a maximum ambient temperature of 50 degrees Celsius and a maximum altitude without derating of 1000 meters.
Internal Product Review
The FC-202P1K5T6136G6191 is a Danfoss VLT FC 202 AQUA drive rated at 1.5 kW with three-phase power input. Operation is notably efficient, with 0.97 efficiency and an IE2 energy efficiency class that supports economical continuous-duty service. The 50 °C maximum ambient temperature gives the drive strong application flexibility, making the unit a very capable choice for water and process systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T6136G6191 is a variable frequency drive manufactured by Danfoss within the VLT FC 202 AQUA Drives series. It connects between a three-phase mains supply and an induction motor, converting fixed-frequency electrical power into a regulated output for pumps and blowers. This variable-speed control allows the motor output to follow demand in water and wastewater treatment systems. The architecture supports process loops that use electronic speed regulation instead of throttling valves or bypass piping, which can reduce unnecessary energy consumption during periods of lower demand.
Under nominal conditions, the inverter operates at an efficiency of 0.97, so only three percent of its electrical input is dissipated as heat. Its electrical power rating is 1.5 kW for motors connected to the output terminals. The input section draws a maximum of 2.7 A from a three-phase feeder, helping determine the conductor and upstream protection requirements. A 10 A pre-fuse must protect the drive to meet its short-circuit protection requirements. Operation is allowed at ambient temperatures up to 50 °C, above which temperature derating must be applied. These operating limits help prevent excessive thermal loading in enclosed control cabinets used in wet-process plants.
At a 550 V DC-link potential, the inverter can supply an output current of 2.9 A, providing additional current capacity for changing motor loads. Power loss is limited to 65 W under the stated operating conditions, which affects cabinet ventilation and heat dissipation requirements. The drive has an IE2 energy-efficiency classification under the applicable IEC system for power drive equipment. Its vibration tolerance is 1.0 g, allowing installation on skids or wall panels exposed to moderate machine oscillations. Continuous operation without power derating is permitted at altitudes up to 1000 m. The control system operates across a modulation range of 0.01 to 500 Hz, providing a broad adjustment range for pump and blower speed.
