FC-202P1K5T6134F6726 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K5T6134F6726 is part of the VLT FC 202 AQUA Drives series and features a power rating of 1.5 kW with a 2.0 horsepower output. This drive delivers a continuous output current of 2.9 A and a maximum output frequency of 590 Hz, operating on three phase power. It offers an efficiency of 0.97 and has a short-circuit rating of 100000 Arms.
Internal Product Review
The FC-202P1K5T6134F6726 is a Danfoss VLT FC 202 AQUA drive with a 1.5 kW rating and three-phase power input. High 0.97 efficiency and a 590 Hz maximum output frequency support smooth, energy-conscious motor control in demanding pump and fan applications. Strong system protection is a standout advantage, especially with the 100000 Arms short-circuit rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T6134F6726 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It is intended to regulate centrifugal pumps, blowers, and other water-handling machinery in industrial automation. The drive converts fixed three-phase mains power into a speed-controlled output that matches real-time process demand.
This model delivers a nominal output of 1.5 kW while supplying a continuous motor current of 2.9 A; its overload capacity increases the current to 4.4 A during short torque surges. Input draw is limited to 2.7 A, and coordination with upstream protection is handled through a maximum 10 A pre-fuse. The drive reaches an operating efficiency of 0.97, minimizing heat generation even when its transistor bridge modulates the output at frequencies up to 590 Hz. Analog feedback to supervisory controllers is provided through an 8-bit signal that can drive resistive loads down to 500 Ω, while the digital input terminals present an impedance of 4 kΩ. For discrete status reporting, the open-collector output supports 40 mA at pulse rates as high as 32 kHz. All power sections support balanced three-phase operation, which helps keep harmonic loading symmetrical across the supply phases.
The installation accommodates power cables with conductors up to 4 mm² (12 AWG). Branch circuits may rely on the unit’s short-circuit withstand rating of 100,000 A rms without supplemental current-limiting reactors. Thermal dissipation under rated load is limited to 65 W, reducing enclosure ventilation requirements. For installations using imperial motor ratings, the drive supports a shaft power of 2.0 HP, matching common pump motor frames. Residual power loss remains low enough to support side-by-side mounting inside compact pump panels. Proper enclosure airflow and the required electrical clearances must still be maintained around the installed units.
