FC-202P1K5T4134F6402 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K5T4134F6402 is part of the VLT FC 202 AQUA Drives series and operates on three-phase power with a mains voltage range of 380 to 480 VAC. It offers a power rating of 1.5 kW, a continuous KVA of 2.7 at 460 V, and achieves a 2.0 HP output. The drive features an energy efficiency class of IE2 with a maximum efficiency of 0.97, and supports a maximum ambient temperature of 50 °C with a relative humidity of up to 95%.
Internal Product Review
The FC-202P1K5T4134F6402 is a Danfoss VLT FC 202 AQUA drive designed for efficient variable-speed control on 380 - 480 VAC three-phase power. Operation is notably efficient with 0.97 efficiency and an IE2 energy efficiency class, a strong fit for energy-conscious process systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T4134F6402 is an AC variable-frequency drive produced by Danfoss within the VLT FC 202 AQUA Drives series. It modulates three-phase power to control the speed of water-handling pumps and fans. This allows connected equipment to operate according to process demand, reducing energy use and mechanical stress in industrial automation and municipal installations.
This model can deliver up to 2.7 kVA of apparent power at 460 V, indicating the maximum continuous volt-ampere load it may place on the supply. An efficiency of 0.97 means that three percent of the incoming electrical energy is lost as heat under rated conditions. The motor shaft output corresponds to 2.0 HP, supporting medium-size centrifugal pumps commonly used in booster stations. Line current is limited to 3.1 A when the supply voltage remains within the permitted range of 380–480 VAC. These values help with the selection of upstream breakers, fuses, and cabling that can support steady operation. The inverter feeds the motor with up to 3.4 A of phase current, while upstream protection can use gG-10 cartridge fuses rated at no more than 10 A to limit fault energy during a short circuit.
The drive tolerates ambient temperatures up to 50 °C without derating and continues operating in air with up to 95% relative humidity. Its energy efficiency class of IE2 supports compliance with regional pump efficiency regulations, while its electrical power rating of 1.5 kW corresponds to the stated horsepower for metric-based sizing. Heat dissipation remains low at 62 W, allowing installation in compact panels, and shielded motor leads may extend up to 150 m before additional output filters are required. Field wiring enters through terminals sized for 4 mm² conductors, and a single-core disconnect link with a cross-sectional area of 6 mm² can be fitted when local codes require a main isolator.
