FC-202P1K5T4131B8649 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P1K5T4131B8649 is a drive from the VLT FC 202 AQUA Drives series, designed for three phase power with a voltage range of 380 to 480 VAC. It provides a power rating of 1.5 kW, continuous output currents up to 4.1 A, and operates at an efficiency of 0.97 at rated load.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T4131B8649 is an AC variable-frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It modulates three-phase power to regulate motor speed in pump and fan systems, allowing water-handling equipment to match flow or pressure requirements without mechanical throttling. By converting a fixed-frequency supply into an adjustable output, the unit improves energy use and process stability in industrial automation applications that require precise liquid management. The variable-speed output also enables connected equipment to respond efficiently to changing operating demands.
The drive connects to facilities that provide 380 to 480 VAC three-phase power and maintains a continuous output of 4.1 A when the supply voltage is between 380 V and 440 V. Under these conditions, the electronic stage operates with an efficiency of 0.97, so only a small fraction of the supplied energy is dissipated as heat. Power loss is 62 W under rated load, which should be considered when arranging airflow and enclosure ventilation. During startup or rapid transients, the input bridge can accept a maximum line current of 3.7 A across the same voltage range. This current value helps determine suitable upstream conductors and protective components for the installation.
When the supply voltage rises to between 441 V and 480 V, the inverter provides a reduced continuous load current of 3.4 A while delivering the shaft power expected from a 2.0 HP motor. The drive has a rated output of 1.5 kW, supporting applications that state power requirements in either customary or metric units. The permitted phase imbalance is up to 3.0%, helping prevent excessive negative-sequence currents during uneven loading. The control section operates with either a 50 Hz or 60 Hz supply frequency and is designed for three-phase installations. This frequency compatibility allows the drive to operate with switchgear and filtering equipment commonly used in water-handling control panels across different power systems.
