FC-202P1K5T2134N7434 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K5T2134N7434 is part of the VLT FC 202 AQUA Drives series and has a power rating of 1.5 kW and supports three phase 200 to 240 VAC mains voltage. This drive features a continuous output current of 7.5 A, energy efficiency class IE2, and operates with a maximum ambient temperature of 50°C. It offers a maximum input current of 6.8 A and is rated at 2.0 horsepower.
Internal Product Review
The FC-202P1K5T2134N7434 is a Danfoss VLT FC 202 AQUA Drive for variable-frequency motor control on 200 to 240 VAC three-phase power. A 1.5 kW power rating and 0.96 efficiency make the drive a strong choice for energy-conscious pump and water-system applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T2134N7434 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit modulates three-phase 200–240 VAC power to regulate induction motor speed in pumping, aeration, and filtration equipment used throughout process plants and municipal water facilities. By adjusting motor frequency instead of throttling flow mechanically, the drive helps maintain constant pressure, minimizes energy waste, and integrates with PLC-based automation that supervises broader fluid-handling systems.
At 208 V, the inverter can deliver an apparent power of 2.70 kVA, and its continuous output current reaches 7.5 A, so motors within its 1.5 kW rating receive sufficient starting and running torque. Conversion efficiency is rated at 0.96, meaning only 4 percent of the incoming power becomes heat under nominal load. The product carries an energy efficiency classification of IE2, aligning it with modern pump guidelines. The drive supports motors rated at 2.0 HP, which accommodates many small centrifugal pumps used in secondary loops. Operation is supported on 200–240 VAC three-phase mains without external transformers, allowing the drive to be wired directly into standard low-voltage panels.
The electronics can operate at ambient temperatures up to 50 °C and at relative humidity levels up to 95 percent, so the drive tolerates warm, damp pump rooms. Control wiring can be connected to spring terminals that accept conductors up to 6 mm², while motor feeders accept conductors up to 4 mm². Shielded cable runs may extend up to 150 m, while unshielded cable runs may extend up to 300 m. Inrush protection is coordinated with a 20 A pre-fuse, and steady input current is limited to 6.8 A. Thermal losses are limited to 82 W, simplifying cabinet airflow calculations for the drive.
