FC-202P1K5T2134F6393 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P1K5T2134F6393 is part of the VLT FC 202 AQUA Drives series and operates at a power rating of 1.5 kW with a horse power of 2.0 HP. It supports a mains voltage of 200 to 240 VAC, continuous output current of 7.5 A, and runs on three phase power. This drive is designed for efficiency of 0.96 and a maximum ambient temperature of 50 °C.
Internal Product Review
The FC-202P1K5T2134F6393 is a Danfoss VLT FC 202 AQUA drive rated at 1.5 kW for 200–240 VAC service. Three-phase power and 7.5 A continuous output current support smooth, stable motor control in demanding fluid-handling applications. A 0.96 efficiency is a particularly strong advantage for energy-conscious drive installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T2134F6393 is a variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. As a dedicated AC inverter, it regulates the speed of centrifugal pumps and other water-handling machinery, allowing precise flow control and reduced energy consumption in industrial automation. By converting fixed-frequency three-phase power into an adjustable output, the unit operates between the supply network and the induction motor and provides the controlled torque required in filtration, irrigation, and wastewater applications.
The drive is rated for a continuous apparent power of 2.70 kVA, corresponding to a motor output rating of 1.5 kW, or 2.0 HP. It accepts a three-phase input between 200 to 240 VAC at a utility frequency of 50 or 60 Hz. The unit draws a continuous input current of 6.8 A while delivering 7.5 A on the output side. These current values should be considered when selecting conductor sizes, protective devices, and enclosure cooling. Efficiency reaches 0.96, so approximately 4% of the electrical energy is lost as heat. The rated power loss is 82 W, which must be removed through adequate enclosure ventilation to maintain reliable operation.
The drive provides an output frequency of up to 590 Hz, allowing compatible high-frequency motors to operate above their nominal speed when the application requires it. Shielded motor cables may reach 150 m, while unshielded runs may extend to 300 m where electromagnetic interference requirements permit. Drive terminals accept disconnect conductors with a cross-sectional area of up to 6 mm² and line or motor conductors with a cross-sectional area of up to 4 mm². The branch circuit is protected by a 20 A upstream fuse. The drive can operate continuously at ambient temperatures up to 50 °C when installed with the required ventilation and clearances.
