FC-202P1K5T2131F8448 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P1K5T2131F8448 is part of the VLT FC 202 AQUA Drives series and has a power rating of 1.5 kW with a horsepower of 2.0 HP. It supports a mains voltage of 200 to 240 VAC three-phase power and delivers a continuous output current of 7.5 Amps. The drive operates at up to 95 percent relative humidity and a maximum ambient temperature of 50 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P1K5T2131F8448 variable frequency drive is produced by Danfoss for the VLT FC 202 AQUA Drives series. Intended for centrifugal pumps, blowers, and similar fluid-handling equipment, this unit converts fixed mains power into a regulated output that lets automation systems match motor speed to process demand. By integrating pump-specific control algorithms with low-harmonic power electronics, the drive supports energy savings and reduces mechanical stress in municipal water treatment, irrigation, and industrial circulating loops.
Electrical ratings suit small three-phase pump motors supplied from 200–240 VAC distribution. The inverter delivers up to 1.5 kW of motor power while drawing a steady 6.8 A from the mains and supplying 7.5 A through its output terminals. At 208 V, the apparent power requirement is 2.70 kVA, so upstream breakers and cabling can be sized accordingly. Overall efficiency reaches 0.96, corresponding to only 82 W of heat dissipation at full load. A three-phase topology supports balanced current flow, and 20 A prefuses protect the front-end rectifier. Disconnect terminals accept conductors up to 6 mm², and motor power studs accept 4 mm² wire to simplify field wiring in compact pump panels.
The unit operates without derating at elevations up to 1000 m and at ambient air temperatures up to 50 °C. Humidity tolerance reaches 95% under noncondensing conditions, allowing installation in damp pump rooms. Shielded motor leads may run up to 150 m, while unshielded leads may extend to 300 m when local electromagnetic compatibility requirements permit. The series identifier 202 indicates compatibility with AQUA control functions for water treatment tasks. The drive’s cable and fuse provisions support integration alongside auxiliary contactors, soft starters, or bypass arrangements in continuous-duty pumping stations.
